Tugboat Slip Kills New Worker
A marina worker died of head injuries when a 30-ton tugboat slipped in a lifting harness.
A marina worker died of head injuries when a 30-ton tugboat slipped in a lifting harness.
A 35-year-old man was found several hours after he died inside a barn he had been cleaning.
A worker was fatally injured when he was crushed between the cross member of the boom lift arm and the frame of a skid-steer loader.
A defective brake caliper exploded during a test while it was being repaired in a shop. One worker was killed and two more were injured by the flying fragments. The brake caliper had been part
Employees working for a plumbing contractor were hoisting pipes up from ground level to higher levels for storage. They were standing on structural steel while they transferred the pipes to the floor above. One employee
A mill supervisor was killed when he was hit by a piece of a door which blew off an anvil chipper. The incident occurred when a chipper saw knife fell into the conveyor system and
A punch press operator was killed when a punch struck him in the chest, puncturing his heart. He had been working in a plant where construction machinery was manufactured and repaired. He had been operating
A crew had been contracted to clean nets at an ocean-side fish farm. They were working aboard a barge which was fitted with a fixed boom crane. This crane was being used to lift a
A service employee was working on a split-rim tire assembly. He was in the process of removing the outer rear wheel on a truck-tractor. The inner wheel was still inflated which is against the recommended

A 23-year-old mill worker received a compound fracture to his foot when he tried to clear a conveyor jam.
Using a gasoline-powered pressure washer in a poorly ventilated area below deck in a fishing boat has killed one dock worker and injured several others, including emergency personnel.
A terrible incident in Tennessee, in which an equipment operator died from severe burns, shows how important it is to keep equipment inspected and properly maintained.
A maintenance mechanic died when he was crushed between an overhead bridge - crane and a light fixture.
A construction worker was killed when a skid-steer loader crushed him against a dump truck.
When in doubt, improvise. That old advice might work well in certain circumstances, but it?s dangerous if it involves compromising safety.
A mill worker fell to his death when an unfinished overhead walkway fell apart. The catwalk was constructed at a sawmill so maintenance workers could reach machinery for oiling. The person building the catwalk was
Just as construction can be dangerous work, so can taking structures down. This proved to be the case for a crew repairing a signboard located high up the side of a building. They had completed
Two workers were assigned to unload a barge tied up at a riverside dock. One was operating a front end loader to transfer lime into a portable conveyor to carry it up to the dock.
A dairy farmer died when he got caught in a conveyor delivering feed to his cows. Nobody witnessed the incident, but a co-owner of the farm said he was probably trying to lift the machine
A recycling plant worker was slicing open bales of plastic bags as they went by him on a conveyor. He slipped and fell onto the conveyor. He was carried along the conveyor and buried under
A crane operator was killed when an 80-foot (25-meter) tree fell and crushed the cab. A second worker was injured, as was a bystander struck by a tree while attempting to rescue the crane operator.
A worker was hired to clean up and crush cars in an automobile junkyard.
A 17-year-old teenager who was operating a defective forklift in a construction yard in Portsmouth, UK, died suddenly when the machine overturned and crushed him.
Do your forklift operators consistently sound horns when turning around corners or entering trucks?
In an attempt to dislodge some wood on a conveyor belt, a manager at a wood products plant in Maine walked out onto an I-beam.