Operator Killed as Boom Touches Power Line
A company was contracted to dig post holes for a fencing project which was located adjacent to overhead power lines. A hydraulic auger with a 30-foot boom was being operated from a flatbed truck. On
A company was contracted to dig post holes for a fencing project which was located adjacent to overhead power lines. A hydraulic auger with a 30-foot boom was being operated from a flatbed truck. On
At a sawmill, a fire broke out. It had originated in the vacuum system which picks up sawdust from the various woodworking machines and carries it to a large silo outside the building.
A laborer at a surface quarry mine was trying to take apart a crane boom to install additional sections. He had trouble removing one of the pins holding two sections together. While underneath an unsupported
A farm employee was trapped and crushed in a hopper while he was unloading alfalfa cubes from a truck. He had parked the truck close to the powered hopper. A conveyor from the truck to
A worker was crushed to death by an elevator he was attempting to repair. He and a more experienced worker were attempting to move a hydraulic feed line in an elevator pit. He and his

A crew leadman and a foreman were fatally burned when their oxygen-saturated clothing caught fire. A sanitation district had hired a contractor to install a gate valve in a hydraulic channel. The limited-access channel was
A 24-year-old nursery laborer had been on the job for just three days when he died of a traumatic injury to the brain.

We're taught to make eye contact to signify our intentions - such as when crossing the road on a crosswalk.
An 84-year-old man, who had farmed the same land for 60 years, was killed while his wife watched when he bypass - started a tractor.
A cattle farmer died from strangulation that resulted when his loose clothing caught in the rotating shaft of a conveyor belt.
People who are not qualified to operate forklifts should stay clear of them. Here's why:

An overhead crane operator died when a bale of steel slipped off the C-hook and hit him. He had positioned the bale incorrectly on the C-hook, so it was not balanced and centered. Ordinarily he
A man working in the recycling business was electrocuted when he was helping move some scrap metal stored beneath a power line.
A bulldozer operator was preparing a roadbed by using the machine to lift trees out of the way. A hydraulic line to the right front hydraulic cylinder ruptured, spraying hydraulic fluid onto the engine manifold
A large piece of equipment was being installed in a new paper mill. Two workers were making the final adjustments to a three-ton (2.72-tonne) machine suspended overhead by four threaded rods. They were supporting one
A large steel beam fell from a storage crib and crushed a worker to death. The fatality happened when a crane operator was positioning the structural steel building beam on a rack for storage before
A large diesel fuel tank fell on a worker who was helping move it into place. The tank measured six feet in diameter by nearly 20 feet in length. It weighed 3,000 pounds when empty
A migrant farm worker died after the tractor he was driving overturned on a country road. The victim, who had no experience driving on public roads, was pulling a load of tobacco when the wagon jack-knifed and broke loose from the tractor.
Using a foot to clear a jammed wood chipper sadly left the owner of a tree service company in Wisconsin with more than a leg injury.
Forklifts and worker-congested pathways can be a deadly mix, especially when forklift operators haven't been trained properly.
A 67-year-old farmer was killed while trying to bypass start his tractor.

A 61-year-old woodworker was killed as he was trying to replace a glue tray in a glue-press machine while it was still operating.
A truck driver was killed by a 750-pound (340-kilogram) package of beams which fell from a forklift.

At approximately midnight, a worker was attempting to repair a leak in a hydraulic cylinder of a newly installed washer in a commercial laundry plant. Leaning under the machine, he attempted to unhook a hydraulic
A worker died of electrocution when a cable hanging from a crane touched a high voltage power line. He was helping to unload concrete pilings from a flatbed truck, and was guiding the pilings as