Cleaning Solvent Causes Fatal Burns
A textile worker was working on a conveyor belt. At the end of a day's production she had to clean the belt using a highly volatile cleaning solvent. This solvent was used very close to

A textile worker was working on a conveyor belt. At the end of a day's production she had to clean the belt using a highly volatile cleaning solvent. This solvent was used very close to
Two workers were installing shutters on the windows of a building. One was about six feet (two meters) above the ground on a scaffold.
A worker operating an automatic die-cast system died after being crushed between the back end of an industrial robot and a steel safety pole. The hydraulic robot had been installed in an existing production line
A farmer died when a corn planter collapsed on him as he tried to change a tire. He had been moving the planter to another field when he noticed one of the road tires was
A worker was crushed by a load of steel when it was knocked off a truck. She was assisting at the receiving end of an operation loading 50-foot steel I-beams onto a truck. Her job

A worker received massive head injuries when a crane lifting a 54,600-pound piece of steel tipped over. The crane was unstable because one outrigger device, which extends from the crane to balance it was inoperable.
Could This Have Been You?
Two 53-year-old male maintenance mechanics died when a suspended steel dock plate fell on them.
Hoisting an automobile engine by the use of chains and a forklift proved deadly in a California auto shop recently.
Properly trained workers know exactly what will happen when they operate a machine switch - but if a switch is tripped in a moment of inattention or confusion
The 50-year-old victim was part owner of a motocross track that operated out of a sand pit in New Jersey.
Roger, who sowed the seeds of his farming career at the age of 13, may have scoffed at the foretelling of his death on a small farm in Iowa 22 years later.
His parents were long-time customers, and the victim had done odd jobs at the store.

An experienced crane operator was running an electrically powered gantry crane in a process building which was in the final stages of construction. Other than the occasional use of a propane-powered forklift, there were no

Early in the evening an operator of a crane was installing storm sewer pipes. Suddenly, the boom of the crane contacted the overhead high tension wires. A pipe layer who was guiding the pipe as
A worker was standing on a catwalk, using a vacuum with a long nozzle to clean a fast-moving conveyor belt. It appears the nozzle became caught between two large rollers and pulled the worker into
A makeshift attempt to free a jammed conveyor cost a millwright his life. He got a grip on the conveyor drive shaft with a long pipe wrench, then straddled the pipe wrench handle and bounced
A twenty-five year old delivery man for a lumber company was delivering a load of lumber to a construction site. The load included approximately 20 roof trusses. Although the delivery vehicle was equipped with a

A student working on a summer job was electrocuted when a truck-mounted crane he was operating struck a power line. The driver of the truck instructed the student to move the crane, then backed the

A 17-year old worker died just one hour into his new job after becoming pinned under a forklift. He hadn't received any job orientation or training.
Michigan Occupational Safety and Health Administration (MIOSHA) investigators are trying to determine how a robotic arm pulled a manager into a press while it was being cleaned. Steven McGirr, 46, died instantly.
A 32-year-old man was killed when a 1500-lb (735 kg) wind machine fan fell on him.
A 64-year-old operator was running an excavator in British Columbia.

Trevor was 24 years old when he died in an unguarded conveyor at an asphalt plant, where investigators concluded that several safety procedures could have prevented his death.
A 55-year-old crane operator was killed when the bridge crane he was operating collapsed and crushed him.

A 35-year-old man was found several hours after he died inside a barn he had been cleaning. He had been using a pressure washer with an 11-horsepower gasoline engine.