Main Category Group
Driverless Truck Runs Down Spotter
A vehicle spotter who was controlling the movements of trucks in and out of the dumping bays at a landfill site was struck and killed by a runaway truck. He had directed a truck into
Main Category Group
A vehicle spotter who was controlling the movements of trucks in and out of the dumping bays at a landfill site was struck and killed by a runaway truck. He had directed a truck into
A worker knowingly walked into a dangerous area and was hit by a heavy object as it fell. He was working at a plant which dismantles large machinery. Metal was cut with torches and large
An employee of a natural gas well service company was knocked unconscious by hydrogen sulfide gas. He fell into a water tank and drowned. He had been trying to get a sample of the liquid
A night shift worker was working with his supervisor in an adhesive tape manufacturing plant. They had been monitoring a machine that applied a coat of adhesive to the tape, and were collecting samples, taking
Poor supervision and poor planning were to blame for a fatality that occurred when a trench caved in and crushed an electrician. He was part of a crew working on construction of a shopping center.
Painters were painting a new warehouse. To paint the roof supports, a scaffold was needed. The crew borrowed a scaffold located in the warehouse. They dismantled the borrowed scaffold, moved it to where they were
A broken crawling board sent two workers to the ground, where one died and the other received multiple injuries. The two workers were painting a barn roof. They were using a crawling board, also known
A young man was working on a building renovation project. He was inexperienced, and was working part-time for a sub-contractor. Despite repeated warnings not to do so, he had been in the habit of climbing
A truck-trailer unit pulling a second small tanker trailer rolled over and collided with a parked transit bus ? causing a fire and explosion. The truck driver was killed. The rig was carrying gasoline. The
A bulldozer operator was sprayed with hot oil when a hydraulic hose ruptured. He was wearing flammable polyester clothing that melted on his skin. He later died from burn injuries. Investigation showed the hose had
Carbon monoxide killed a supervisor and an engineering draftsman when they entered a lime kiln to check the thickness of the metal walls. The kiln was not blocked off from another nearby kiln which had

A machine at a steel foundry was found to be jammed in the "up" position and could not be lowered. The plant maintenance mechanic, who was an experienced and careful worker, was called to repair
Getting caught between two diesel-operated ditching machines caused fatal injuries at a construction equipment salvage business. The victim was working alone in the scrap yard he owned. He was using a mobile ditch-drilling machine to
A construction elevator at an office building under construction began speeding upwards uncontrollably. It struck the top of the hoistway at about 65 miles an hour. Two of the occupants were killed and three others
The night shift crew at a paper mill told the incoming day shift supervisor that the press was putting an unwanted black line on the paper being produced.
A forklift driver moving scrap wood died when he was crushed between the forklift and a dumpster. He had hauled the load of discarded shingles to a remote section of the yard. A metal dump
A 67-year old feed store employee died from multiple crushing injuries after he was pinned by a forklift that ran off a loading dock and overturned, pinning him to the ground. The victim had dismounted
A snowplow driver went missing and was presumed drowned after the vehicle crashed through the ice on a lake. He had been assigned to plow a winter road linking two communities.
A large diesel fuel tank fell on a worker who was helping move it into place. The tank measured six feet in diameter by nearly 20 feet in length. It weighed 3,000 pounds when empty
A service employee was working on a split-rim tire assembly. He was in the process of removing the outer rear wheel on a truck-tractor. The inner wheel was still inflated which is against the recommended
A construction worker outside the safe work zone was fatally injured after a car travelling at an estimated 80 miles an hour (129 kilometers an hour) struck him from behind. The incident took place on
The following is a real-life example of what went wrong and what corrective measures resulted from incidents in the oil and gas industry.

Welding torch sparks and oil tanks don't mix. Actually that's not true. Under the right circumstances they can mix with tragic results.
Standing on a pile of stacked rounded steel bars proved to be a deadly decision for a worker. The worker climbed onto the pile in a warehouse in order to attach a sling so a
An ironworker died after falling 23 feet (seven meters) from a steel girder at a construction site.