Picture This! A Bucket Load of Problems
Taking shortcuts with scaffolding is risky business. Here is a photograph showing a makeshift scaffold that was cobbled together by a person who should have known better, namely a safety supervisor.
Taking shortcuts with scaffolding is risky business. Here is a photograph showing a makeshift scaffold that was cobbled together by a person who should have known better, namely a safety supervisor.
Location is everything, particularly when one is speaking about access to a fire extinguisher during an emergency. This device is well out of reach for all but the tallest people.
Here's an example oaf having an object designed to save lives that may be useless because it isn't easily accessible. The object in this case is a rescue ring that can't be used without a knife to cut it free.
Amateur "handy persons" often produce shoddy work by failing to realize their limitations. But here's an example of someone crossing the line from shoddy to potentially deadly by performing electrical work they had no business tackling.
Try bending sharply at the waist for a minute and then stand up. Feel dizzy? Now imagine doing it while standing on two narrow boards high above the ground, with nothing but hard ground to break your fall should you lose your balance.
One of the safety violations in this image is almost screaming at you, it's so obvious.
This unbelievable photograph was snapped more than 30 floors above Sydney, Australia.
This photograph illustrates a recipe for disaster. A worker toils high above the ground while standing on a stack of pallets hoisted by an aerial lift. To make matters worse, he has no form of fall protection and isn't even wearing a hardhat.
This photograph illustrates a hazard seen time and time again in the workplace--workers standing under suspended loads. Yes, that's danger tape in front of the workers, warning people to stay away from the area. It appears that these workers didn't get the memo.
Walking on solid ground one second and suddenly stepping into nothingness through an unguarded floor opening has to be one of the most frightening experiences for a construction worker. With a little planning, these often-deadly falls are preventable.
What happens to your rig when you underestimate a clearance height?
This photo illustrates a very dangerous way to use a boom as a work platform, above traffic no less.
Molten metal and jeans and a T-shirt have no business being in close proximity. But this photograph shows a woefully unprotected worker getting up close and permanent with red-hot metal.
A sobering reminder of confined space dangers that you can use to protect your own workers.

Use this photo to train workers how NOT to carry out a tagout control of hazardous energy when servicing machinery and equipment.
This photo illustrates the importance of protecting workers in road and highway construction zones against motor vehicle traffic hazards.
Can you tell what dangerous and illegal action this worker is engaging in?

This might be an arrangement Blackbeard the Pirate would be proud of, but it won't pass an OSHA inspection. Can you figure out what's wrong with this picture?
Use this photo to test your knowledge of OSHA electrical safety rules and educate workers to electric hazards.
This double circular mill saw isn't properly guarded. Can you explain why?

Fire Exits must be clearly marked; ditto exits that look like fire exits but really aren't. If it sounds confusing, it's only because it IS confusing.
This is a great demonstration of how you shouldn't store hazardous materials. Can you spot the OSHA violation?
There may be a few situations where this sort of use of a forklift is safe, but this definitely isn't one of them.

If you were an OSHA inspector, what would you do if you saw this?
The worker in this picture is committing at least 3 OSHA violations--can you spot them?