Fisherman Bypasses Deadman Controls
A fisherman was working alone on his boat when he became entangled in a net which was being wrapped around a revolving drum. A hydraulic pump used to turn the drum was designed to be
A fisherman was working alone on his boat when he became entangled in a net which was being wrapped around a revolving drum. A hydraulic pump used to turn the drum was designed to be
A worker had been sandblasting equipment in preparation for repairs. A co-worker later found him dead on the floor. The victim had been using a supplied-air respirator, but it appeared he had mistakenly plugged it
A young worker, new to the job, was operating a small garden tractor as part of a walkway construction in a park. He had about 100 hours of experience on the machine, but no formal
The morning sun momentarily blinded Phil as stepped out of his truck. Only 7:30 in the morning and it was already warm. "Gonna be another scorcher," Phil thought, as he trudged across the parking lot he'd crossed for more than 30 years.
Operating excavators, tractors and other equipment on uneven terrain can be tricky. Doing so proved deadly for a young worker at a Ft. Myers, FL, construction site.
A 50-year-old plumber working at a construction site was killed when a skid steer loader tipped forward and hit him on the head.
The shipyard welder was welding on a barge in dry dock when sparks from her wire-fed welding gun ignited hydraulic fluid that had atomized.
An experienced die cast operator?s heart stopped after he was pinned between a hydraulic robot and a pole.

There are at least 8 ways for supervisors to determine [...]
Two workers died of oxygen deprivation as they were repairing the concrete wall at a garbage disposal site. One of them had been attaching anchor bolts to the wall of an intake pit and was
An ironworker foreman died in a fall from a roof under construction after he removed a safety barricade. The victim was supervising a crew building the roof of a cold storage warehouse. The final structural
A sawmill employee was operating an automated stacker when he noticed a board out of place on the top of the bundle of lumber. He left his work station and went to the stack to
A punch press operator was killed when he was struck in the head by a hand crank tool. The fatality occurred in a plant that manufactures lenses and other parts for developing photographic film.
A worker was fatally injured while grinding on the lid of a metal toolbox. The sparks from his grinder ignited an explosive mixture of oxygen and acetylene which had leaked from a torch placed inside
A tractor loader was traveling over a log bridge across a canyon when the bridge collapsed under its weight. When the loader fell part way down into the rocky canyon, the operator was thrown off
Hand-held grinders are used frequently in the oil and gas industry in both maintenance shops and in the field. These tools contain significant potential energy and should be treated with respect.
It's a story that first warms the heart and then freeze-dries it. Betty Jean Deyo and Joel Ridley were childhood friends, but they lost touch for decades.

Dale Scott was in the mechanic's shop alone fixing a leaky left rear tire on a front-end loader.
Workers can be extremely careful about keeping their hands away from machine controls, but overlook the possibility that a shirt pocket or other piece of clothing can snag onto those controls, with disastrous consequences.

A mechanic was killed when a bus fell on him. He apparently had used a 12-ton bottle jack under the differential to raise the rear of the 35,000-pound (15,875-kilogram) bus.
The former manager of Atlantic States Cast Iron Pipe Co. [...]
A mixer operator in a cement roofing tile plant noticed that the sand was not flowing from the bottom of a hopper onto the conveyor belt. A plant laborer was instructed by the operator to
A man working in a steel plant was removing steel slag from the bottom of an upright ladle. He was using a jack hammer, a pry bar and a cutting torch fueled by acetylene and oxygen.
A clean-up worker was killed when struck by a rotating cut-off saw as he and a co-worker tried to clear a logjam on a mill conveyor. The victim, a temporary employee who had worked at
A laborer was steam cleaning a scraper used in a street paving project. The hydraulically-controlled bowl apron of the scraper weighing approximately 2,500 pounds had been left in the raised position. It had not been