Robot Pins Die Cast Operator
An experienced die cast operator?s heart stopped after he was pinned between a hydraulic robot and a pole.
An experienced die cast operator?s heart stopped after he was pinned between a hydraulic robot and a pole.
Lift trucks are handy tools found on the sites of [...]
A laborer was pushing hardwood chips along on a conveyor toward the digester in a paper mill. Working alone within the chip bin, he was using a pole 12 feet (3.7 meters) in length to
A fall from a catwalk above a bulk conveyor system killed a maritime facility worker. The conveyor was used to transfer fertilizer from barges to a warehouse. At the time of the incident, the victim
A worker assigned to make repairs near an overhead hoist was cautioned to "be careful." There were high voltage warning signs nearby. He was not told that the power supply to the overhead hoist was
A fisherman was working alone on his boat when he became entangled in a net which was being wrapped around a revolving drum. A hydraulic pump used to turn the drum was designed to be
A worker had been sandblasting equipment in preparation for repairs. A co-worker later found him dead on the floor. The victim had been using a supplied-air respirator, but it appeared he had mistakenly plugged it
A tractor loader was traveling over a log bridge across a canyon when the bridge collapsed under its weight. When the loader fell part way down into the rocky canyon, the operator was thrown off
Hand-held grinders are used frequently in the oil and gas industry in both maintenance shops and in the field. These tools contain significant potential energy and should be treated with respect.
It's a story that first warms the heart and then freeze-dries it. Betty Jean Deyo and Joel Ridley were childhood friends, but they lost touch for decades.

Dale Scott was in the mechanic's shop alone fixing a leaky left rear tire on a front-end loader.
Workers can be extremely careful about keeping their hands away from machine controls, but overlook the possibility that a shirt pocket or other piece of clothing can snag onto those controls, with disastrous consequences.

A mechanic was killed when a bus fell on him. He apparently had used a 12-ton bottle jack under the differential to raise the rear of the 35,000-pound (15,875-kilogram) bus.

There are at least 8 ways for supervisors to determine [...]
Two workers died of oxygen deprivation as they were repairing the concrete wall at a garbage disposal site. One of them had been attaching anchor bolts to the wall of an intake pit and was
An ironworker foreman died in a fall from a roof under construction after he removed a safety barricade. The victim was supervising a crew building the roof of a cold storage warehouse. The final structural
A sawmill employee was operating an automated stacker when he noticed a board out of place on the top of the bundle of lumber. He left his work station and went to the stack to
A punch press operator was killed when he was struck in the head by a hand crank tool. The fatality occurred in a plant that manufactures lenses and other parts for developing photographic film.
A worker was fatally injured while grinding on the lid of a metal toolbox. The sparks from his grinder ignited an explosive mixture of oxygen and acetylene which had leaked from a torch placed inside
Hospital workers are certainly not unaccustomed to death, but when a fellow worker dies in an incident there, shock waves reverberate throughout the facility.
Little is known about Antonio Tapia, 27, except that he was a Mexican immigrant and was living with a relative, Ricardo Vega Sanchez, and Sanchez’s wife and daughter, in Burlington, NJ.
An Ontario supplier of oil purification systems has been fined $90,000, plus a 25 percent victim fine surcharge, regarding an occupational fatality.
A 20-year-old man was working by himself changing a press punch at a small machine shop when a welded hydraulic hose coupling blew, killing him instantly.
The men must have felt privileged to work on the largest public works project in the state?s history, the building of an interstate highway bridge, but for several, their excitement turned to tragedy.
A man was strangled after his shirt-sleeve was caught by the rotating drill bit of a drill press he was operating.