El bloqueo/etiquetado es una medida de seguridad importante para asegurar [...]
Using a foot to clear a jammed wood chipper sadly left the owner of a tree service company in Wisconsin with more than a leg injury.
Wearing gloves around moving machinery can be a recipe for disaster, as a recent fatality in Colorado illustrates.
This video is the perfect way to introduce new employees to general occupational hazards to which they may be exposed and to re-train experienced workers. Program includes basic safety rules, electrical hazards, powered equipment and machinery, back injury prevention, fire protection and more.
Key Takeaways: - Understanding the purpose of lock and tag [...]
Key Takeaways: - Understanding the purpose of lock and tag [...]
Key Takeaways: - Understanding the purpose of lock and tag [...]
Key Takeaways: - Recognize the purpose of lock and tag [...]
Energy control procedures (ECP) are required for any operations where unexpected energization, start up or release of stored energy could harm workers during the servicing or maintenance of machines and equipment.
You must annually review your lockout/tagout program and make updates and changes as needed. Copy or customize this checklist from the University of Washington to meet the needs of your LOTO program Annual Inspection and Training Assessment.
During the servicing and maintenance of machines and equipment, the unexpected startup or release of stored energy can result in serious injury or death. Injuries may include electrocution, burns, crushing, cutting, lacerating, amputating, or fracturing body parts. It’s estimated more than 120 deaths and over 50,000 injuries are prevented each year due to following proper lockout/tagout procedures.
Lack of LOTO procedures leads to worker’s death. A 46-year-old male employee was fatally injured when he was crushed by the upper ram of a rubber mixer.
Companies have a duty to protect workers both while using equipment and machinery for their intended purpose and when repairing and maintaining that equipment. The primary way of fulfilling that duty is through what’s called “lockout,” which is when a equipment has been turned off and rendered inoperable with the use of a lock.
Safety devices like barrier guards that are designed to keep workers away from operating machinery don’t do much good when machines are shut down for maintenance and repairs. The danger is that the machinery will start up while being serviced and crush, electrocute, burn and/or amputate the limbs of workers performing the servicing operations. These incidents are typically caused by the inadvertent and unforeseen release of energy left in the system. That’s why OHS laws require you not only to turn off the machine but ensure it’s isolated from its energy source before servicing it. The way to do this is by implementing what’s called a lockout/tagout (LOTO) program.
You must annually review your lockout/tagout program and make updates and changes as needed. Copy or customize this checklist from the University of Washington to meet the needs of your LOTO program Annual Inspection and Training Assessment.
Electricity is the movement of electrons between atoms. In their normal state, electrons in a conductor such as copper, freely and randomly move from atom to atom.
Failure to lock out and tag machinery before working on it is a major cause of injury and death in the United States. Workers can be electrocuted or lose fingers, hands, arms, or suffer severe crushing injuries because machinery is inadvertently turned on while being serviced or maintained. Lockout/Tagout prevents these in juries. This short program is designed to explain basic lockout/tagout procedures, some terminology used in the procedures and general requirements.
It is estimated that over 100 workers are seriously injured every day due to failure to properly lockout-tagout equipment. This program covers the purpose of lockout-tagout, the hazards associated with the accidental release of stored energy, proper lockout-tagout procedures for attaining zero energy state, proper startup procedures and special situations. Referred by many professionals as the best training program in the market, Lockout-Tagout creates an awareness and respect for the hazards and motivates your workers to follow best practices to prevent incidents and ensure their safety.
It is estimated that over 100 workers are seriously injured every day due to failure to properly lockout-tagout equipment. This program covers the purpose of lockout-tagout, the hazards associated with the accidental release of stored energy, proper lockout-tagout procedures for attaining zero energy state, proper startup procedures and special situations. Referred by many professionals as the best training program in the market, Lockout-Tagout creates an awareness and respect for the hazards and motivates your workers to follow best practices to prevent incidents and ensure their safety.
In most industries it is as simple as turning off the power and installing a lock to prevent the power from being turned back on. In the solid waste industry the purpose is the same, protecting employees, but the energy sources we need to control aren't usually controlled by just a circuit breaker. This program takes a detailed look about how to properly lock and block trash hauling vehicles during maintenance and clean out operations.
Failure to lock out and tag machinery before working on it is a major cause of injury and death in the United States. Workers can be electrocuted or lose fingers, hands, arms, or suffer severe crushing injuries because machinery is inadvertently turned on while being serviced or maintained. Lockout/Tagout prevents these in juries. This short program is designed to explain basic lockout/tagout procedures, some terminology used in the procedures and general requirements.
Hazardous Locations are defined as premises, buildings or parts thereof where fire or explosion hazards may exist due to the presence of flammable gases or vapors, flammable liquids, combustible dusts, or easily ignitable fibers.
Hazardous Locations are defined as premises, buildings or parts thereof where fire or explosion hazards may exist due to the presence of flammable gases or vapors, flammable liquids, combustible dusts, or easily ignitable fibers.
What’s at Stake? Consider the following story… A worker noticed [...]
An OSHA inspection found 24 alleged serious violations, most of [...]
Since it's your first time, you may want to checkout some of the video tutorials.
800-ICW-SAFETY (800.429.7233)
SAFETYOnDemand@icwgroup.com