Laborer Killed by Heat Stroke
Heavy work on a hot day caused a fatal heat stroke for a laborer at an industrial waste processing facility. From the start of his shift in the morning to the time he collapsed in

Heavy work on a hot day caused a fatal heat stroke for a laborer at an industrial waste processing facility. From the start of his shift in the morning to the time he collapsed in
A poorly-maintained truck and an unsafe action combined to kill a worker. The fatality occurred at a plant where asphalt roofing products were being manufactured. The truck was an old flatbed used only on company

A crew leadman and a foreman were fatally burned when their oxygen-saturated clothing caught fire. A sanitation district had hired a contractor to install a gate valve in a hydraulic channel. The limited-access channel was
One pipelayer was crushed to death and another injured when a trench collapsed.

It has taken more than two years, but a Nebraska company has finally pleaded guilty in the death of an employee who was buried alive by soybeans in 2003.
Overcrowding of passenger vans is a common problem in agricultural areas where large numbers of workers need to be transported quickly to worksites.
A tow truck driver was killed while trying to stop his runaway truck.
You need to know about the dangers of confined spaces - even if you don't work in them.
A welder was killed while welding on a wastewater recovery tank.
Thousands of people have died in accidents involving all terrain vehicles (ATV's).

Shift-Work Safety Checklist Any supervisor who works in a multiple-shift [...]

A hospital maintenance worker was repairing a broken hand held hair dryer. He asked a co-worker to assist in locating some acetone to remove epoxy from his hands.

A barge maintenance worker was found dead of asphyxiation in a compartment on the vessel. The barge, used as a construction base camp, was being prepared for the upcoming construction season. On the day of

Failure to maintain equipment resulted in a fatal explosion in a metal products plant. Oil that had oozed from a hydraulic press caught fire. The fire caused two hydraulic fluid accumulators to explode.

A ladder touching a high tension wire - this scenario has caused countless fatalities in all kinds of industries and workplaces and homes. An employee of an aluminum siding company was electrocuted when the ladder
A snowplow driver went missing and was presumed drowned after the vehicle crashed through the ice on a lake. He had been assigned to plow a winter road linking two communities.
Do you know no work deadline is more important than safety? Or would you ever drive too fast for safety because of job pressure? Consider what happened to a driver hauling gravel in a hurry

A maintenance worker with no electrical training was electrocuted while doing renovation work in a 10-story office tower. The victim was standing on an aluminum ladder removing ceiling tiles when both hands made contact with
An Illinois family suffering the loss of a father in a highway construction crash has issued a plea for drivers to slow down.
The supervisor of a towing company died as a result of falling under a truck wheel.

A young father of two children was killed in an unusual manner in Dayton, OH, late in 2006. Thomas Morgan, 29, was trying to free a jam in a concrete crusher when he was struck by part of the machine.

The victim, a 22-year-old male firefighter recruit collapsed while running at the end of a training day.

A 14-year-old Hispanic laborer who said he was 18 in order to get a job was partially decapitated and suffered multiple crushing injuries after he came in contact with a machine used to shred and grind plastic bags into a recyclable product.
A worker was crushed underneath an overturned road-milling machine.

A fall from 25 feet (7.5 meters) killed a construction worker.