Worker Slips On Wet Tarp
After doing the same job for nearly 20 years, a worker died in a falling from the top of a load on a flatbed trailer. He worked for a company which packaged sand, gravel and

After doing the same job for nearly 20 years, a worker died in a falling from the top of a load on a flatbed trailer. He worked for a company which packaged sand, gravel and

A worker received an electric shock when he touched a boom on a lifting device. The ground wire had become detached. It was a hot day, so his skin was sweaty and moist, making it
An apprentice electrician was killed by contact with 525 volts while he was installing a switchgear for a large piece of machinery in a manufacturing plant. The victim was running a ground wire when he
A teenage worker died when his head became caught in the pasta-making machine he was operating. His job was to put the ingredients into the machine.
A worker cleaning metal pieces prior to repainting was found unconscious at his workstation. Resuscitation by co-workers, firefighters and ambulance attendants failed to revive him. Methylene chloride formic acid was suspected as a cause of
A male laborer died after being crushed while cleaning the inside of a concrete mixer at a pipemanufacturing facility. The 25-year old Mexican immigrant was taking part in the daily routine cleaning procedure when a
An unsafe practice that was allegedly encouraged by his employer resulted in a 52-year-old man losing his life in December 2005.

A young father of two children was killed in an unusual manner in Dayton, OH, late in 2006. Thomas Morgan, 29, was trying to free a jam in a concrete crusher when he was struck by part of the machine.

A fire that killed a Long Island, NY, man and critically injured his wife was caused by a faulty power cord, according to fire officials.

Falls are the second leading cause of accidental deaths in North America - second only to motor vehicle accidents.
A mill operator at a rubber compound plant died when caught between two rollers on the lamination machine he was operating.
An experienced worker was laying concrete on the second level of a construction project when the face shield from a welder's mask fell from an upper level. The construction worker agreed to cross the wet
A chemical manufacturing worker was splashed with a solution containing 51 percent 2,4-DCP. while moving a hose used to transfer the material. The solution covered 60 to 65 percent of his body surface area including
Late in the afternoon, a worker at a manufacturing company was requested to clean out a vat. It was approximately 5 feet deep and 5 feet in diameter. He was instructed to use
A painter fell 25 feet (7.62 meters) from the top of a tank to the concrete pad below. He died of multiple traumatic injuries.
A millworker died when the bulldozer he was driving rolled down an embankment. A lightning strike had caused a fire in the sawmill area. The fire department brought the fire under control and left the
A sawmill employee was operating an automated stacker when he noticed a board out of place on the top of the bundle of lumber. He left his work station and went to the stack to
The night shift crew at a paper mill told the incoming day shift supervisor that the press was putting an unwanted black line on the paper being produced.
A supervisor in a logging operation was killed by a falling tree. The crew of three had been working under a tight deadline as they cut dead trees to be removed by helicopter. The supervisor

Alcohol use may have been a major factor in the suffocation of a general maintenance worker repairing a water leak.

A 19-year-old immigrant from Mexico died from heat stress on the job in Fort Worth, TX, where he reportedly never saw a paycheck.

When workers are electrocuted at worksites it's often because metal objects they are holding touch overhead electrical lines.

Jeffrey Mills was the kind of man who didn't mind going out of his way to help out.

Two men working for a municipality subcontractor died of burns received while installing a valve in a concrete sewage channel.

A mechanic was killed when a bus fell on him. He apparently had used a 12-ton bottle jack under the differential to raise the rear of the 35,000-pound (15,875-kilogram) bus.