Hand Crank Hits Operator in the Head
A punch press operator was killed when he was struck in the head by a hand crank tool. The fatality occurred in a plant that manufactures lenses and other parts for developing photographic film.
A punch press operator was killed when he was struck in the head by a hand crank tool. The fatality occurred in a plant that manufactures lenses and other parts for developing photographic film.
A property owner had contracted a backhoe operator and a helper to assist him in digging a well. The excavation was 14 feet by 10 feet. The sides were not sloped nor were they shored

Alcohol use may have been a major factor in the suffocation of a general maintenance worker repairing a water leak.

A 37-year-old welder died when an explosion occurred in the tanker trailer where he was working.
In life, Jeffrey Mills made a difference. In death, he also made a difference, but with a huge impact.

We're taught to make eye contact to signify our intentions - such as when crossing the road on a crosswalk.
The victim had been working 11 years at the company.

The symptoms of heat-related illness would have been obvious to anyone trained to spot them.
A storage rack was moved close to the welder?s workshop and placed on its side for repair.
A worker fell through an insecure opening on a roof during a construction project. A fire-damaged warehouse was being re-insulated and rebuilt. A hole which had been cut in the roof by the fire department
At the age of 51 a sheet metal worker died of lung cancer. His case was typical of asbestos exposure. He had been exposed during his working career when removing and installing duct work in
A laborer involved in the demolition of a building was electrocuted when he came into contact with a live wire. Most of the wiring had been disconnected, but there were still some live circuits to

After doing the same job for nearly 20 years, a worker died in a falling from the top of a load on a flatbed trailer. He worked for a company which packaged sand, gravel and

A worker received an electric shock when he touched a boom on a lifting device. The ground wire had become detached. It was a hot day, so his skin was sweaty and moist, making it
A backhoe in poor repair could only be started by using a screwdriver to engage the starter. Besides its inoperable starter button, the backhoe had a broken safety catch on the gear shift. In addition,

Several unsecured propane cylinders were being stored on the third floor of a construction project. A large propane heater was in use nearby to dry out the work-in-progress. A loud noise alerted the workers that
Could This Have Been You? An apprentice ironworker was killed when she fell through an unprotected vent shaft.
In 2000-2001, three welders in Massachusetts were fatally injured while cutting metal containers with torches.
One minute he was applying a flammable solvent to a floor to loosen linoleum. The next moment he was engulfed in flames, with third and fourth-degree burns to most of his body.

At 21, Catrina Faye Coffman had everything to look forward to.

The victim, a 22-year-old male firefighter recruit collapsed while running at the end of a training day.
The 45-year-old worker was operating the crusher for a construction company, which subcontracted to the US government to produce gravel for forest roads.
A forklift shop technician was crushed when the forks of a lift he was working on fell and landed on his chest.
An experienced worker was laying concrete on the second level of a construction project when the face shield from a welder's mask fell from an upper level. The construction worker agreed to cross the wet
A worker and his supervisor were working in a confined space using a flammable substance and an acetylene torch. The confined space was a freshwater pumping station. The two men were installing rigid foam insulation