Pre-Use Inspection Checklist for Hand and Power Tools Pre-Use Inspection Checklist for Hand and Power Tools Favorite Print Email English Before using hand tools inspect for the following: The outside of the tool is free of grease, oil and accumulated foreign matter The tool has no visible cracks in jaws or handle Blades or bits are not damaged, cracked, etc. Handles are not cracked, damaged or loose from heads of hammers, axes mauls and other similar tools Tips of screwdrivers, chisels or other similar tools show no excessive wear Gripping surfaces pliers, wrenches or other similar tools are not worn Tools such as chisels and punches do not have mushroomed heads Cutting tools such as chisels and axes are sharp Tool appears to be in generally good condition Before using power tools inspect for the following: The outside of the tool is free of grease, oil and accumulated foreign matter Tool power-source shows no damage (cord, airline, battery, etc.) Tool is double insulated and tool housing is not damaged If so equipped, electrical cord third prong (ground) is intact All shields, guards or attachments required by OSHA or manufacturer are present Rotating or moving parts of tool are guarded to prevent physical contact Tool is not leaking fluid such as gasoline, oil etc. Blades or bits are not damaged, cracked, excessively worn, etc. Tool appears to be in generally good condition Proper PPE is available New & Trending New & Trending April 17 – Orientation is Your First Line of Defense English & Spanish Eye Injury – Restaurant Safety – Meeting Kit English & Spanish Eye Injury – Restaurant Safety – Meeting Kit – Spanish Jeffrey Turner2019-06-01T00:00:00+00:00 You May Also Like Quick Cost Savings Statement: The Value of Safety and Health OSHA Directive: Whistleblowers Investigations Manual