Don’t Join the Electrical Circuit
If you have to rescue someone who is receiving an electric shock, be careful or you might end up becoming a shock victim yourself.
If you have to rescue someone who is receiving an electric shock, be careful or you might end up becoming a shock victim yourself.
The practice of using a lock and tag to isolate power from a piece of manufacturing equipment is not uncommon at work, but you may not realize that more injuries from failure of locking out happen at home and they can be prevented.

In this Safety Talk, we’ll discuss what happens during a caught-between incident, how to avoid hazardous situations when working with machinery, and provide some tips on how to work around machinery without getting hurt.
On average more than 150 workers in North America are killed every year from electric shock, burns, and other effects caused by dangerous exposure to electricity. Many of these deaths could have been prevented by wearing the right personal protective equipment (PPE).

Exposure to unguarded or improperly guarded machines causes over 1000 deaths and 20,000 serious cuts, crushing injuries, scalpings and amputations every year
Thousands of non-disabling and disabling injuries occur annually from work with electricity and on average one person dies every day from an electrical incident on the job.

Struck-by and caught-between hazards account for over 1,500 workplace deaths a year and are present in almost every industry sector.

Meanwhile, Bill the operator returned from his break. He did not see John and there was no indication the machine was under repair. Assuming his machine was ready to run, Bill started it. He had
What's at Stake? Do you think it's a good idea [...]
You must take steps to prevent equipment from becoming energized while it is being worked on. The energy can be pneumatic, electrical, mechanical, hydraulic, chemical or thermal. There can be other sources as well —

A sawmill worker suffered multiple fractures to his right arm when it became caught in an edger outfeed chain and sprocket. For unknown reasons, he had lifted the guard to check the drive mechanism.
Many victims of workplace electrocution are the people who maintain electrical equipment. Here are some reminders for staying safe while making this equipment safe.

Largest-Ever Workplace Violations Settlement The Los Angeles County District Attorney’s [...]
A worker for an auto parts manufacturer was performing maintenance [...]

OSHA conducted an inspection of a bakery after receiving a [...]

OSHA launched an investigation after an employee died and two [...]

OSHA conducted an inspection in October 2010 and cited the [...]

Odds of winning the lottery 1 in 135,145,920 (multi-state, mega-millions [...]
Odds of winning the lottery: 1 in 135,145,920 (multi-state, mega [...]
The Control of Hazardous Energy (lockout/tagout) Standard is a frequent source of [...]

Working with machinery and equipment is always hazardous. But workers [...]

OSHA conducted an inspection at a west Milwaukee plant in [...]

The willful violation alleges failure to enforce lockout/tagout procedures to [...]

The topic of this word search is machine safety. See if you can find all the words listed within the puzzle. While you are searching, think about the words. They describe some of the actions and hazards of typical workplace machinery. You will also find words describing machine guards and other safety features.
A worker on a portable sawmill was killed when he was hit in the head by an unguarded drive shaft that had been displaced by the impact of heavy equipment working in the area. A