Main Category Group
Boom Kills Deckhand
A deckhand on a fishing boat was fatally injured when a boom collapsed.
Main Category Group
A deckhand on a fishing boat was fatally injured when a boom collapsed.

When workers are electrocuted at worksites it's often because metal objects they are holding touch overhead electrical lines.
The Workplace Health, Safety and Compensation Commission of New Brunswick is investigating the death of a excavator operator
A terrible incident in Tennessee, in which an equipment operator died from severe burns, shows how important it is to keep equipment inspected and properly maintained.
A 20-year-old man was working by himself changing a press punch at a small machine shop when a welded hydraulic hose coupling blew, killing him instantly.
A Wyoming man died in an oil rig incident near the Converse-Natrona county line.
The victim was a foreman of a crew working at a Wyoming rig site.

A narcotics officer who died of cancer believed that exposure to the toxic products, solvents, and volatiles of the meth labs and drug factories he busted contributed to his death.
A young worker who had been hospitalized for electric shock in a similar incident just three months earlier died when the machine he was operating came in contact with a 14,000-volt power line.
The incident happened in a matter of seconds. A scaffold collapse left three workers dangling from their safety ropes beneath the Jefferson Barracks Bridge over the Mississippi River.
As a forklift operator, it's important to realize the majority of the safety responsibility rests on your shoulders - you are in the driver's seat.
Falling six feet (two meters) doesn't seem like a lot, but it was enough to kill a 68-year-old supervisor who was climbing down a loading dock.
Failure to have a ground fault circuit interrupter (GFCI) in place was a key element in the death of a Minnesota turkey farmer.
An experienced die cast operator?s heart stopped after he was pinned between a hydraulic robot and a pole.
A 55-year-old crane operator was killed when the bridge crane he was operating collapsed and crushed him.
Thousands of people have died in accidents involving all terrain vehicles (ATV's).
A young child helping his father is pulled into an operating wood chipper and killed.

There are at least 8 ways for supervisors to determine [...]

An overhead crane operator died when a bale of steel slipped off the C-hook and hit him. He had positioned the bale incorrectly on the C-hook, so it was not balanced and centered. Ordinarily he
Argon gas accumulated in the bottom of a large tank killed two workers assigned to clean the tank. The atmosphere in the tank had been tested before they entered it, but the testing was done
A heavy equipment operator was killed in an explosion when he hit a natural gas pipeline with a piece of heavy machinery. Four other workers were severely burned. The operator was digging a drainage trench
Two workers were suffocated by gas from a fire extinguishing system they were repairing on a ship. They were working on the cylinders containing carbon dioxide. Suddenly three of the cylinders discharged, filling the room
A crew was engaged in cleaning a vessel in a plant. After the lunch break, one of the workers returned early to continue with his cleaning. A co-worker saw him climb the outside scaffold from
An untrained and poorly equipped tree trimmer was electrocuted when a branch he had just cut touched an 8,000 volt power line. He worked for a tree removal service, and was cutting down a tree

A journeyman painter died of massive thermal burns caused when an electrical contact set off an explosion of volatile waterproofing material. The painter and a co-worker were in the basket of a personlift, designed to