Man Dies After Being Sucked Into Machine
A worker needs to use a piece of machinery. He is unaware that the device is not operating properly and is being worked on at that moment by maintenance employees he cannot see.
A worker needs to use a piece of machinery. He is unaware that the device is not operating properly and is being worked on at that moment by maintenance employees he cannot see.
The manager of a farm supply store suffocated in a bin full of corn while attempting to dislodge stuck kernels.

In the first fatality for his company, a North Carolina worker died after a fall from a truck bed.
Having a swing stage scaffold motor fail can be a pain, but if a worker is left stranded in a hazardous area, he or she can die.
Sixteen-year-old Shona* didn't even have time to react to the robber's demand for money before the bullet from his gun shattered her skull.

A crew leadman and a foreman were fatally burned when their oxygen-saturated clothing caught fire.
An experienced operations manager for a well servicing company died after being hit in the head with a length of pipe.
The owner of a lumber company was struck and fatally injured by a falling tree just minutes after arriving at work.
A 66-year-old carpenter died after falling from the plank of an improvised scaffold.
A 23-year-old worker at a company that produces concrete and brick pavers, masonry and retaining walls, died after becoming caught in a concrete mixer.
Talking to your workers about electrical hazards is always timely. [...]

At approximately midnight, a worker was attempting to repair a leak in a hydraulic cylinder of a newly installed washer in a commercial laundry plant. Leaning under the machine, he attempted to unhook a hydraulic
A defective brake caliper exploded during a test while it was being repaired in a shop. One worker was killed and two more were injured by the flying fragments. The brake caliper had been part
The driver of a flat deck truck loaded with bricks was killed when the vehicle hit a soft shoulder, went out of control, crossed into oncoming traffic and collided head-on with a tractor-trailer. The incident
A worker in a steel mill was removing steel slag from the bottom of a ladle, about 14 by 10 by 8 feet in size. He was using a jackhammer, a pry bar and an
Lack of oxygen killed a farmer who fell into a silo. He was preparing for the arrival of corn to be placed in the top of the silo. He climbed into the top of the
A company was contracted to dig post holes for a fencing project which was located adjacent to overhead power lines. A hydraulic auger with a 30-foot boom was being operated from a flatbed truck. On

Early in the evening an operator of a crane was installing storm sewer pipes. Suddenly, the boom of the crane contacted the overhead high tension wires. A pipe layer who was guiding the pipe as
An aerial lift truck was parked on a hill beside a power line. Its driver set the emergency brake, but did not chock the wheels or engage the outriggers on the lift truck. The utility
A painter fell 25 feet (7.62 meters) from the top of a tank to the concrete pad below. He died of multiple traumatic injuries.
A worker died in a flash fire which occurred when a static spark ignited solvent vapors on top of a large blending tank in a manufacturing plant. The spark, which was either from his clothing
An explosion in a fuel tanker killed a worker loading the truck. The cause of the explosion was a static spark generated by the pumping of a thick oil product into the tanker. The spark
A shortcut across a moving conveyor belt was a fatal decision for a worker. He was watching the conveyor when he noticed a piece of timber fall to the floor instead of into the waste
The boom of a log loader dropped suddenly and killed a logging truck driver as he was helping load a pulp truck. He had climbed up an access ladder to the loader cab to hand

A cleanup person was instructed by his foreman to do the cleanup of a conveyor area jammed with debris. This involved loading the debris onto the conveyor, running it until it was clean, shutting it