Street Sweeper Caught in Machine
A city maintenance worker who was trying to dislodge material from a street sweeper's suction hose was killed after accidentally placing his foot on a lever that raises and lowers the machine's hopper.
A city maintenance worker who was trying to dislodge material from a street sweeper's suction hose was killed after accidentally placing his foot on a lever that raises and lowers the machine's hopper.
A field engineer was killed when struck by a truck while he painted markings on the shoulder of a highway.

A fall from 25 feet (7.5 meters) killed a construction worker.
Had the crew of a barge used a steel pin [...]
A worker was attempting to remove an end plug from a pipe containing a 100 per cent concentration of anhydrous hydrofluoric acid under pressure. He applied sufficient pressure with a wrench to break the pipe,

About two weeks before this fatality, an electrical plug on a power cable of a welding machine was found to be damaged. The broken piece was the protective aluminum cover which housed the plug attached
A contractor had been awarded the job of replacing a town's sewage system. An engineering firm had taken samples for ground conditions, and their report was available to bidders. Sampling via boreholes disclosed ground water
A brick wall collapsed and killed a worker digging in a trench beside it. He had been looking for a water line and had dug down about four feet (1.22 meters). The wall, seven feet
Three employees equipped with respirators were preparing to paint a heat exchanger in a manufacturing plant. Their sandblasting work was almost finished. The portable air compressor used to supply breathing air to the sandblasters' hoods
A concrete worker was electrocuted when a pumping truck boom touched a 34,000-volt power line. He had been manipulating the boom with a hard-wired remote control, preparing to pour concrete into a wooden form. When
A painter was electrocuted and a co-worker survived a fall after they connected with a high voltage overhead power line. The two were using an aluminum extension ladder as they cleaned the brick wall of
Two plumbers had been working in a construction trench. When it was time to come back up to the street level, they rode in the bucket of an excavator. As the excavator operator started to

A worker cleaning the third floor of a warehouse received massive head and chest injuries after falling more than 22 feet (seven meters) to the concrete floor below. No one witnessed the accident so it
A steel drum containing lubricating oil exploded while a worker was heating it with a propane torch. The explosion occurred in cold winter weather in a temporary logging camp. The victim was preparing to replace

A makeshift switch on a sandblasting unit apparently set off an explosion of gasoline vapors killing a worker who was cleaning a petroleum storage tank. The victim had recently been promoted to foreman. His first
A worker was standing on a catwalk, using a vacuum with a long nozzle to clean a fast-moving conveyor belt. It appears the nozzle became caught between two large rollers and pulled the worker into

Three workers, one licensed electrician and two apprentices, were rewiring a residential basement. They were using a 300 watt lightbulb, drawing power from a temporary connection to power wires on an outside pole. The electrician
A laborer at a surface quarry mine was trying to take apart a crane boom to install additional sections. He had trouble removing one of the pins holding two sections together. While underneath an unsupported
A food production worker employed at a pizza dough manufacturing plant was killed when he was struck in the neck by the steel blade on a dough machine. The victim and a co-worker were assigned
A backhoe in poor repair could only be started by using a screwdriver to engage the starter. Besides its inoperable starter button, the backhoe had a broken safety catch on the gear shift. In addition,
The cold storage area of a food warehouse was the scene of a forklift fatality. The victim was working from a standup forklift when he backed into a chain. His neck was pinned between the
A driver working for a shiploader was killed when he backed a forklift off the edge of a pier. There was no barrier or bull rail in place to prevent such a tragedy, but a
A mechanic working for a snowmobile dealer was killed on a test drive. He had worked on the machine, and was trying it out on a public snowmobile trail near his workplace. He was traveling
A worker cleaning metal pieces prior to repainting was found unconscious at his workstation. Resuscitation by co-workers, firefighters and ambulance attendants failed to revive him. Methylene chloride formic acid was suspected as a cause of

A student working on a summer job was electrocuted when a truck-mounted crane he was operating struck a power line. The driver of the truck instructed the student to move the crane, then backed the