Main Category Group
Operator Crushed inside Knitting Machine
A machine operator at a textile plant died of asphyxia when his torso was compressed in an automated circular knitting machine.
Main Category Group
A machine operator at a textile plant died of asphyxia when his torso was compressed in an automated circular knitting machine.
A construction worker died when a 2,000-pound (907-kilogram) steel pile (column) struck him.
A 28-year-old father of three was killed while driving a concrete pumper truck.
A 22-year-old roofer fell approximately 22 feet (6.7 meters) off the edge of a roof onto concrete and died.

The following checklist on the uses of color coding and [...]
An experienced worker was laying concrete on the second level of a construction project when the face shield from a welder's mask fell from an upper level. The construction worker agreed to cross the wet

A 35-year-old man was found several hours after he died inside a barn he had been cleaning. He had been using a pressure washer with an 11-horsepower gasoline engine.
A professional miner, working alone, was struck and pinned down by falling rock. The miner was scaling - knocking down loose overhead rock. He was working under an unsafe, unbolted rock ceiling, contrary to safe
A crew was logging a right-of-way prior to road construction. A faller was preparing to cut down a tree. He signaled to another worker, waving with his yellow hardhat to indicate the direction in which
A worker was feeding coal from a bunker into a rail car at a steam plant. The coal jammed in the bottom of the bunker. The worker then entered the rail car and used a
One pipelayer was crushed to death and another injured when a trench collapsed. They were laying sewer pipe in a trench four feet (1.22 meters) wide at the bottom and 15 feet (4.57 meters) wide
Two workers were installing shutters on the windows of a building. One was about six feet (two meters) above the ground on a scaffold.
A worker stepped onto a suspended ceiling. It broke under his weight and he fell through. He landed on a concrete floor 42 feet below and died of blood loss and multiple injuries. A more
A welder with 20 years’ experience as an iron worker died after he and his metal cage fell from a high-rise building where he and a co-worker were welding tube girts. Each welder was supported
A laborer working as a helper on a bark boiler in a paper mill was trying to unjam a blockage on a conveyor. The jam was preventing bark from moving into the boiler to be used as fuel.
At a sawmill, a fire broke out. It had originated in the vacuum system which picks up sawdust from the various woodworking machines and carries it to a large silo outside the building.
A painter died of burns suffered in an explosion which occurred when he was working inside a newly-constructed large steel tank. A co-worker outside the tank survived with burns and a broken arm. The first
A spotter was crushed to death by a road roller during paving work. He had been guiding construction vehicles and general traffic on the road as asphalt pavement was being applied and finished. The roller
A fitter went into a concrete batching plant to do some repairs while the plant was still in use. As the sand he was standing on was discharged from the hopper into a mixing vehicle
A truck driver was crushed to death between the frame and dump box of a dump truck. He had been raising the dump box when the safety over-travel cable joining the truck frame and box

A lead hand employed by a heavy equipment dealer was responsible for operating a grader and a simple conveyor system. The conveyor was being used to separate topsoil. The conveyor was set on the diagonal,
A worker was killed when he was dragged into a rotating concrete mixer while he was cleaning it. He had completed a pressurized concrete pour at a construction site. He then returned to the company
A truck driver was killed when a bundle of plastic irrigation pipe he was securing slipped, striking him in the head. A forklift operator placed four bundles of pipe onto the victim's semi-trailer bed. The
A forklift overturned at a salvage lumber operation, fatally injuring the operator. The young worker had been asked to move the forklift from the lumber storage area to the resaw area when he returned to
A shipper-receiver at a warehouse was crushed to death when he was pinned by the open back door of a van which was backing up. He had been loading material into the van with a