Main Category Group
Chain Lowers Worker to Death
A young laborer was seated on a looped chain as he was being lowered into a 21-foot (6.4-meter) deep manhole to prepare for utility construction work.
Main Category Group
A young laborer was seated on a looped chain as he was being lowered into a 21-foot (6.4-meter) deep manhole to prepare for utility construction work.
A crew was building a chain-link fence in a residential area. One worker lifted a 21-foot (seven-meter) section of the metal top rail into the air and the rail contacted a 7,200-volt power line. He
Two drilling crew members were electrocuted when the boom of their drill rig contacted a high-voltage overhead power line. The victims were employed by a company hired to find and blast large rocks that lay
Just as construction can be dangerous work, so can taking structures down. This proved to be the case for a crew repairing a signboard located high up the side of a building. They had completed
A worker died of a broken neck and skull after he fell 23 feet from a scaffold. He was working part-time as a welder-fitter. He did not have experience in working from a scaffold.
A welder was standing on a ladder which ran between two walkways. He was welding on a large piece of equipment which was going to be used in a mining area. A five gallon "unapproved"
A bulldozer operator was preparing a roadbed by using the machine to lift trees out of the way. A hydraulic line to the right front hydraulic cylinder ruptured, spraying hydraulic fluid onto the engine manifold
A welder in a metalwork plant pushed a 250 amp welder on a dolly over to a wall outlet. He plugged it in with his right hand while his left hand was on the welder.
A worker was inside a cement truck mixing drum, cleaning out the residue which had built up and hardened inside. He had a portable light and a jackhammer. There was also a remote switch at
A large piece of equipment was being installed in a new paper mill. Two workers were making the final adjustments to a three-ton (2.72-tonne) machine suspended overhead by four threaded rods. They were supporting one
An employee at a mine was found strangled to death. The scarf he was wearing around his neck had become twisted around the rotating drill. To prevent such a tragedy from recurring, remember these safe
A poorly-supported trailer tipped over and crushed a worker who was operating a sandblaster underneath it. The sandblasting was being done in preparation for painting the metal storage trailer.
A dockworker was crushed by a falling stack of fiberboard. It was part of the cargo that had come from a freight ship and was being moved by forklift to a warehouse.
A recycling plant worker was slicing open bales of plastic bags as they went by him on a conveyor. He slipped and fell onto the conveyor. He was carried along the conveyor and buried under

Heavy work on a hot day caused a fatal heat stroke for a laborer at an industrial waste processing facility. From the start of his shift in the morning to the time he collapsed in
A worker was crushed to death by an elevator he was attempting to repair. He and a more experienced worker were attempting to move a hydraulic feed line in an elevator pit. He and his
A swamper working for his second day on a highway construction project was electrocuted when a crane touched an overhead power line. The crane was being used to remove one-ton cement barriers from the edge
A poorly-maintained truck and an unsafe action combined to kill a worker. The fatality occurred at a plant where asphalt roofing products were being manufactured. The truck was an old flatbed used only on company
The following is a real-life example of what went wrong and what corrective measures resulted from an incident in the oil and gas industry.
If you think fatal falls happen only to construction workers swinging off skyscrapers, consider the following incident: A maintenance worker died after a fall from an elevation of just eight feet (2.5 meters).
Running a gasoline-powered engine in a confined space can have fatal consequences, as an incident at a home construction site clearly shows. Two carpenters entered a basement where a gasoline-powered generator was operating and both
Could This Have Been You? An apprentice ironworker was killed when she fell through an unprotected vent shaft.
At 36, Eder Morales was in the prime of his life. We don't know much about Morales, except that he died young. Too young.
It was a blustery, rainy morning when Craig drove into the nursery parking lot. But the rain didn't dampen his spirits. He was just happy he'd landed a job - and a good one at that.
Although workplace shooting rampages are rarely carried out by women, a terrifying exception occurred a few weeks ago in California.