Argon Gas ‘Drowns’ Welder
Argon gas used as part of a welding operation caused the asphyxiation death of an apprentice welder working in a confined space. He was completing welding work inside a tank being constructed of titanium. Because
Argon gas used as part of a welding operation caused the asphyxiation death of an apprentice welder working in a confined space. He was completing welding work inside a tank being constructed of titanium. Because
A worker painting a fence along a railway was killed when he stepped in front of an express train. He was part of a crew painting the fence located at a rail crossing barrier. The

A job of repainting an outdoor stairway at a commuter train station was the end of the line for a 45-year old man. He fell from a stepladder while painting the concrete and metal stairway
A young man was working as a welder at his weekend job. Situated on a platform approximately 17 feet above the concrete floor, he had been welding for about 15 minutes when he unexpectedly fell
A worker drove a front-end loader up a dirt ramp onto a lowboy trailer in preparation for a move to another job site. As the loader reached the trailer, the tractor tread began to slide
A relatively new truck driver was engaged in transporting rock from the underground blasting area in a mine to the surface. He was still in what has been referred to as a "training position." He
Two paramedics responding to an emergency call at a decommissioned mine in British Columbia were among four people who died there.
Tom probably never knew what hit him, and Dean, driving the front-end loader, did not know he just ran over and killed a co-worker.

Jeffrey Mills was the kind of man who didn't mind going out of his way to help out.

A 61-year-old woodworker was killed as he was trying to replace a glue tray in a glue-press machine while it was still operating.
A 21-year-old construction worker was killed when a Bobcat loader, operating on loose soil, rolled backwards over a 70-foot (21-meter) cliff into a rocky ravine.

Just as you use a checklist to inspect equipment, you [...]

A textile worker was working on a conveyor belt. At the end of a day's production she had to clean the belt using a highly volatile cleaning solvent. This solvent was used very close to

A natural gas company service man was contacted early one winter morning to investigate a gas leak. A bridge crew had noticed a strong odor of gas and a hissing sound at a natural gas

A worker cleaning the third floor of a warehouse received massive head and chest injuries after falling more than 22 feet (seven meters) to the concrete floor below. No one witnessed the accident so it

An experienced worker and his untrained helper lowered an aluminum ladder into an underground fuel storage tank. A small access hatch had been cut into the tank using a water cooled saw. One of the
A miner drowned in an unusual incident involving a drain and high water pressure. He was one of several miners draining a large accumulation of water from a level in the mine several hundred feet
A poorly-maintained truck and an unsafe action combined to kill a worker. The fatality occurred at a plant where asphalt roofing products were being manufactured. The truck was an old flatbed used only on company

A 37-year-old welder died when an explosion occurred in the tanker trailer where he was working.
Prince Edward Island occupational health and safety inspectors are trying to determine how a tree harvester with no one at the controls started up and killed a worker who became caught in its jaws.

The victim, a 22-year-old male firefighter recruit collapsed while running at the end of a training day.
A 33-year-old man, with eight years of experience, was crushed by his own bulldozer when he fell between the treads and the deck.

Standing on a makeshift platform spanning the forks of a lift truck isn?t safe. In California, doing so proved lethal for a 29-year-old worker.

Shift-Work Safety Checklist Any supervisor who works in a multiple-shift [...]

A hospital maintenance worker was repairing a broken hand held hair dryer. He asked a co-worker to assist in locating some acetone to remove epoxy from his hands.