Experienced Maintenance Worker Crushed To Death
A machine at a steel foundry was found to be jammed in the "up" position and could not be lowered. The plant maintenance mechanic, who was an experienced and careful worker, was called to repair

A machine at a steel foundry was found to be jammed in the "up" position and could not be lowered. The plant maintenance mechanic, who was an experienced and careful worker, was called to repair
A forklift driver moving scrap wood died when he was crushed between the forklift and a dumpster. He had hauled the load of discarded shingles to a remote section of the yard. A metal dump
A longshoreman, working on loading a freighter, was near the end of his shift just before 1 a.m. He was walking from the ship toward the exit gate.

A 23-year-old mill worker received a compound fracture to his foot when he tried to clear a conveyor jam.
A deckhand on a fishing boat was fatally injured when a boom collapsed.
A 64-year-old operator was running an excavator in British Columbia.

A 61-year-old woodworker was killed as he was trying to replace a glue tray in a glue-press machine while it was still operating.
People who are not qualified to operate forklifts should stay clear of them. Here's why:

Shift-Work Safety Checklist Any supervisor who works in a multiple-shift [...]
Argon gas used as part of a welding operation caused the asphyxiation death of an apprentice welder working in a confined space. He was completing welding work inside a tank being constructed of titanium. Because
A worker attaching wire rope slings to a walkway was electrocuted when a crane operator swung the main boom of the crane over a walkway. The 56 foot steel walkway was to be used for

A firefighter died while fighting a house fire. He was in charge of the pumper truck crew which was called to a home. The fire was caused by a fireplace insert which had been designed

A cleanup person was instructed by his foreman to do the cleanup of a conveyor area jammed with debris. This involved loading the debris onto the conveyor, running it until it was clean, shutting it
A laborer at a marine shipping terminal was critically injured when he was run over by a trailer being backed onto a barge. The seagoing barge was being loaded with motor vehicles and trailers bound

A laborer working in a pulp mill went into an old, unused control room for his lunch break. Warning lights were flashing indicating a potentially dangerous situation with a plugged pressure sensing device. The worker;

A maintenance worker died after being drawn into a 172-inch diameter vacuum pipe at a paper processing plant.

A 59-year-old worker at a plant that makes plastic bags was fatally injured after falling down industrial stairs.
A marina worker died of head injuries when a 30-ton tugboat slipped in a lifting harness.
A 52-year-old ranch hand died when he was run over by a bulldozer on a cattle ranch in Oregon.
A truck driver was killed by a 750-pound (340-kilogram) package of beams which fell from a forklift.


A textile worker was working on a conveyor belt. At the end of a day's production she had to clean the belt using a highly volatile cleaning solvent. This solvent was used very close to

A journeyman painter died of massive thermal burns caused when an electrical contact set off an explosion of volatile waterproofing material. The painter and a co-worker were in the basket of a personlift, designed to

Failure to maintain equipment resulted in a fatal explosion in a metal products plant. Oil that had oozed from a hydraulic press caught fire. The fire caused two hydraulic fluid accumulators to explode.

A worker, who had recently been given the responsibility of safety inspector for the gravel pit where he worked, was killed when he was crushed in a piece of moving machinery. He was trying to