Word Search – Maritime/Marine
At the docks and on the water, hazards abound. Search here for words related to the marine and maritime industries.
At the docks and on the water, hazards abound. Search here for words related to the marine and maritime industries.

Just as you use a checklist to inspect equipment, you [...]

At approximately midnight, a worker was attempting to repair a leak in a hydraulic cylinder of a newly installed washer in a commercial laundry plant. Leaning under the machine, he attempted to unhook a hydraulic

A barge maintenance worker was found dead of asphyxiation in a compartment on the vessel. The barge, used as a construction base camp, was being prepared for the upcoming construction season. On the day of

A storage tank with approximately 200 gallons of combustible ink was accidentally damaged while it was being moved, causing a leak. A considerable amount of liquid had spilled onto the floor before it was noticed.

A machine at a steel foundry was found to be jammed in the "up" position and could not be lowered. The plant maintenance mechanic, who was an experienced and careful worker, was called to repair
A forklift driver moving scrap wood died when he was crushed between the forklift and a dumpster. He had hauled the load of discarded shingles to a remote section of the yard. A metal dump
A longshoreman, working on loading a freighter, was near the end of his shift just before 1 a.m. He was walking from the ship toward the exit gate.

A 23-year-old mill worker received a compound fracture to his foot when he tried to clear a conveyor jam.
A deckhand on a fishing boat was fatally injured when a boom collapsed.
A 64-year-old operator was running an excavator in British Columbia.

A 61-year-old woodworker was killed as he was trying to replace a glue tray in a glue-press machine while it was still operating.
People who are not qualified to operate forklifts should stay clear of them. Here's why:

Shift-Work Safety Checklist Any supervisor who works in a multiple-shift [...]
Argon gas used as part of a welding operation caused the asphyxiation death of an apprentice welder working in a confined space. He was completing welding work inside a tank being constructed of titanium. Because
A worker attaching wire rope slings to a walkway was electrocuted when a crane operator swung the main boom of the crane over a walkway. The 56 foot steel walkway was to be used for

A firefighter died while fighting a house fire. He was in charge of the pumper truck crew which was called to a home. The fire was caused by a fireplace insert which had been designed

A cleanup person was instructed by his foreman to do the cleanup of a conveyor area jammed with debris. This involved loading the debris onto the conveyor, running it until it was clean, shutting it
A laborer at a marine shipping terminal was critically injured when he was run over by a trailer being backed onto a barge. The seagoing barge was being loaded with motor vehicles and trailers bound

A laborer working in a pulp mill went into an old, unused control room for his lunch break. Warning lights were flashing indicating a potentially dangerous situation with a plugged pressure sensing device. The worker;

A maintenance worker died after being drawn into a 172-inch diameter vacuum pipe at a paper processing plant.

A 59-year-old worker at a plant that makes plastic bags was fatally injured after falling down industrial stairs.
A marina worker died of head injuries when a 30-ton tugboat slipped in a lifting harness.
A 52-year-old ranch hand died when he was run over by a bulldozer on a cattle ranch in Oregon.
A truck driver was killed by a 750-pound (340-kilogram) package of beams which fell from a forklift.