Open Van Door Crushes Shipper
A shipper-receiver at a warehouse was crushed to death when he was pinned by the open back door of a van which was backing up. He had been loading material into the van with a
A shipper-receiver at a warehouse was crushed to death when he was pinned by the open back door of a van which was backing up. He had been loading material into the van with a
A logger suffering from lack of sleep reported for work. He was supposed to be keeping a safety watch for another faller who was cutting down trees, but took a nap instead. A co-worker had
A crew had spent the night shift drilling in preparation for blasting rock in a mine. They set off the blast, but heard only about half of the expected shots. They went to work on
A worker was fatally injured while grinding on the lid of a metal toolbox. The sparks from his grinder ignited an explosive mixture of oxygen and acetylene which had leaked from a torch placed inside
A railway maintenance worker was working on a train trestle. He was standing on a plywood platform and was involved in tightening a bolt on the trestle when his wrench became stuck. He heaved on
A faller started his chainsaw and heard a squealing noise from it. He turned the saw over to see if it was catching on anything. It did not appear to be. He then turned the
A worker was using a chainsaw to trim the ends off spacers used to separate layers of lumber in preparation for drying in a kiln. He was working alone although other workers were close by.
A chunk of broken grinder disk smashed a worker's faceshield and hit him in the forehead, causing a fatal head injury. The employee at a metal castings plant had been using an angle grinder to

A laborer working in a pulp mill went into an old, unused control room for his lunch break. Warning lights were flashing indicating a potentially dangerous situation with a plugged pressure sensing device. The worker;
A railroad bridge building crew was dispatched to a job they had never done before – to try to break up a log jam against a bridge in a river. The crew tried first to
A laborer was killed when a high wind blew over an unsupported concrete block wall. He was part of a three-person team laying subflooring during construction of a townhouse building. The other two workers had
A worker cleaning metal pieces prior to repainting was found unconscious at his workstation. Resuscitation by co-workers, firefighters and ambulance attendants failed to revive him. Methylene chloride formic acid was suspected as a cause of
An inexperienced truck maintenance man was killed instantly when a split-rim wheel assembly exploded with great force. He had apparently mismatched the lock ring on the multi-piece tire.
A worker was crushed to death by an elevator he was attempting to repair. He and a more experienced worker were attempting to move a hydraulic feed line in an elevator pit. He and his
A large diesel fuel tank fell on a worker who was helping move it into place. The tank measured six feet in diameter by nearly 20 feet in length. It weighed 3,000 pounds when empty
A forklift driver and two laborers were stacking 40-foot (12.91-meter) I-beams in preparation for a structural steel construction job. One of the laborers was placing a wooden spacer on the last I-beam when the forklift
A supervisor in a logging operation was killed by a falling tree. The crew of three had been working under a tight deadline as they cut dead trees to be removed by helicopter. The supervisor
A worker drowned in an aqueduct after he became trapped in a drain. A student was working with the victim was unfamiliar with the surroundings, untrained and afraid of water.
A groundsman on a power line crew received a fatal electrical shock when he climbed a power pole. The three-person crew was installing a new power transmission line to replace an older one.
A warehouseman at a store was assigned the job of taking the garbage from the store and putting it into a shredder - compactor. After loading the boxes into the shredder he jumped on top
Three workers were crushed by a rockfall in a mine tunnel, resulting in one death. The fatality occurred when the experienced mine crew was working near the site of a previous incident caused by a
A small business owner had been using an oxy-acetylene cutting torch. In an effort to save money on rental charges for the oxygen cylinder, he was attempting to transfer the remaining oxygen into a propane
Two workers rode a self-propelled lift machine to their deaths as it crashed to the ground. One was washing windows and the other was obtaining measurements for building changes. One of the victims was operating
A new untrained worker died of a head injury after he was hit by a falling tree. He was standing at the rear of a skidder being used in a logging operation at the time of the incident.

A worker received massive head injuries when a crane lifting a 54,600-pound piece of steel tipped over. The crane was unstable because one outrigger device, which extends from the crane to balance it was inoperable.