Falling Steps Crush Man
A 72-year-old truck driver hired to transport and deliver a set of pre-cast concrete steps to a residence was crushed by the steps during delivery.
A 72-year-old truck driver hired to transport and deliver a set of pre-cast concrete steps to a residence was crushed by the steps during delivery.
The victim had been working 11 years at the company.
A scrap metal truck driver was killed and three train passengers slightly injured when an Amtrak train carrying 89 people slammed into a tractor-trailer.
A newspaper carrier making deliveries on her bicycle was killed when an automobile struck her.
Lester L. Woda, an orchard manager, drowned in Okanogan, WA, after becoming trapped in a reservoir pipe.
A restaurant manager died after contacting a faulty refrigerator.

Standing on a makeshift platform spanning the forks of a lift truck isn?t safe. In California, doing so proved lethal for a 29-year-old worker.
Workers were preparing to fill a rail tanker car with canola oil for shipment. A hose fell into the car, and one worker climbed into the tanker to retrieve it. He was overcome by the
A carpenter building a wall form for concrete died when he fell onto a steel reinforcing dowel that was sticking straight up out of a concrete footing. He and a fellow worker were standing on
Three employees equipped with respirators were preparing to paint a heat exchanger in a manufacturing plant. Their sandblasting work was almost finished. The portable air compressor used to supply breathing air to the sandblasters' hoods

A plant worker climbed eight feet up a steel storage rack structure to retrieve material from a top shelf. He fell to the concrete floor and died. The workplace did not have the proper equipment
A truck with a trailer was traveling on a two-lane gravel packed road when the passenger-side wheels went over onto the soft shoulder. The driver attempted to steer the truck back onto the road and
Carbon monoxide killed a supervisor and an engineering draftsman when they entered a lime kiln to check the thickness of the metal walls. The kiln was not blocked off from another nearby kiln which had
A clean-up worker was killed when struck by a rotating cut-off saw as he and a co-worker tried to clear a logjam on a mill conveyor. The victim, a temporary employee who had worked at
A worker was killed when he was dragged into a rotating concrete mixer while he was cleaning it. He had completed a pressurized concrete pour at a construction site. He then returned to the company
An experienced chainsaw operator was killed when the saw he was using struck him in the neck. He was cutting the limbs from a dead tree when the tip of the saw caught on an
A warehouseman at a store was assigned the job of taking the garbage from the store and putting it into a shredder - compactor. After loading the boxes into the shredder he jumped on top
A young worker, new to the job, was operating a small garden tractor as part of a walkway construction in a park. He had about 100 hours of experience on the machine, but no formal
"That's what you get for firing me," said the man shooting rounds from a semi-automatic handgun at a group of managers. Three were killed and two were injured when the ex-employee found the group in
A migrant farm worker died after the tractor he was driving overturned on a country road. The victim, who had no experience driving on public roads, was pulling a load of tobacco when the wagon jack-knifed and broke loose from the tractor.
On average, 5,000 to 6,000 workers are killed each year. Learn from the following reports of real workplace fatalities to avoid a similar fate.
A fatal accident occurred on a drilling rig where a stabbing board, weighing half a ton, fell 45 feet (15 meters) from the derrick, striking a driller who happened to be underneath.
California Occupational Safety and Health Administration (Cal-OSHA) officials want to find out if a steamroller operator was safely belted in before the machine overturned and killed him.
Hand-held grinders are used frequently in the oil and gas industry in both maintenance shops and in the field. These tools contain significant potential energy and should be treated with respect.
An unsafe practice that was allegedly encouraged by his employer resulted in a 52-year-old man losing his life in December 2005.