Aerial Lift Fatality Carries Important Lessons
Workers operating aerial lift trucks need to pay attention to unusual noises, uncharacteristic vibrations, or abnormal operation when controls are activated.
Workers operating aerial lift trucks need to pay attention to unusual noises, uncharacteristic vibrations, or abnormal operation when controls are activated.
More than 2,000 Chinese miners have died in work-related incidents this year to date
A 64-year-old operator was running an excavator in British Columbia.
Two men, aged 20 and 47, plunged 90 feet (30 meters) to their deaths while working as window washers.
Twenty-five-year-old Michael Occhino was alone, driving his 20-ton sanitation truck to a New York Sanitation Department garage.
Two workers died trying to fix a wastewater valve housed in a manhole.
Roger, who sowed the seeds of his farming career at the age of 13, may have scoffed at the foretelling of his death on a small farm in Iowa 22 years later.
A forklift shop technician was crushed when the forks of a lift he was working on fell and landed on his chest.
An employee in a manufacturing plant was found dead of a heart attack believed to have been caused by electric shock. This is the chain of events leading up to his death: About two weeks
A bundle of heavy steel rods came apart and rolled onto a worker. He died of head injuries. The incident occurred when the victim was trying to open the bundle by cutting the steel straps,
A worker had been operating an electrically-powered screw gun with pieces of plywood during a house renovation project. When his co-workers found him, he was dead from electrocution. An investigation suggested this as the likely
Two plumbers had been working in a construction trench. When it was time to come back up to the street level, they rode in the bucket of an excavator. As the excavator operator started to
A painter died of extensive burn injuries after an explosion inside a tank he was painting. A co-worker was also injured but recovered. Both were working for a sheet metal fabrication firm. They were assigned

AThree experienced welders were killed recently in separate incidents while using torches to work on containers they believed were empty. In the first, a mechanic supervisor was using a torch to cut a 55-gallon metal
A front-end loader was working on a dirt road beside a fly ash pit. The loader went off the road into the pit, turned over and pinned the driver under water, where he drowned. The
A driver working for a shiploader was killed when he backed a forklift off the edge of a pier.
A tubular welded frame scaffold was covered with ice and snow. A construction laborer working on the third level slipped and fell headfirst to his death on the pavement about 20 feet (6.1 meters) below.
Two workers rode a self-propelled lift machine to their deaths as it crashed to the ground. One was washing windows and the other was obtaining measurements for building changes. One of the victims was operating
When you work in a large facility such as a hospital, you witness what seems to be a continuous round of construction and maintenance. Buildings get put up, renovated and taken down again.

Welding torch sparks and oil tanks don't mix. Actually that's not true. Under the right circumstances they can mix with tragic results.
Standing on a pile of stacked rounded steel bars proved to be a deadly decision for a worker. The worker climbed onto the pile in a warehouse in order to attach a sling so a
An ironworker died after falling 23 feet (seven meters) from a steel girder at a construction site.
Wearing gloves around moving machinery can be a recipe for disaster, as a recent fatality in Colorado illustrates.
A worker hailed as a hero in a 2001 steel plant explosion in Wales died from severe burns after falling into molten waste at the same plant five years later.
In 2000-2001, three welders in Massachusetts were fatally injured while cutting metal containers with torches.