Two Veteran Firefighters Killed in Flashover
February was a bad month for Canadian firefighters. Two veteran firefighters were killed in Winnipeg in a flashover incident during a house fire.

February was a bad month for Canadian firefighters. Two veteran firefighters were killed in Winnipeg in a flashover incident during a house fire.
A 44-year-old inmate of a North Carolina state prison who was working as a laborer was electrocuted while performing contract work for a utility company.
Fire safety is an extremely important part of any workplace safety program. It's everyone's responsibility to help prevent fires.
When in doubt, improvise. That old advice might work well in certain circumstances, but it?s dangerous if it involves compromising safety.
A worker fell through an insecure opening on a roof during a construction project. A fire-damaged warehouse was being re-insulated and rebuilt. A hole which had been cut in the roof by the fire department
Argon gas accumulated in the bottom of a large tank killed two workers assigned to clean the tank. The atmosphere in the tank had been tested before they entered it, but the testing was done
A missing third prong from an electrical plug resulted in the electrocution death of a laborer. He was climbing a ladder to hand a power drill to another worker when he received a fatal shock.
A welder with 20 years’ experience as an iron worker died after he and his metal cage fell from a high-rise building where he and a co-worker were welding tube girts. Each welder was supported
An empty water tank weighing 14 tons (12.7 metric tons) was being lifted by a crane onto a water tower frame. The land around the new community water tower had been excavated the previous month
A defective aerial lift swung out of control and into a high voltage line, killing an electrical worker. The lift vehicle used by an electric utility company had a problem with the handling of its

A 14-year-old accidentally hung himself with an electric hoist as he played with the dangerous piece of equipment. The incident occurred at an equipment rental company where the boy worked, helping customers load and unload

A 37-year-old welder died when an explosion occurred in the tanker trailer where he was working.

A young father of two children was killed in an unusual manner in Dayton, OH, late in 2006. Thomas Morgan, 29, was trying to free a jam in a concrete crusher when he was struck by part of the machine.

An electrical arc ignited dust in a wood flour mill, causing an explosion that burned a worker to death.

The symptoms of heat-related illness would have been obvious to anyone trained to spot them.

A fall from 25 feet (7.5 meters) killed a construction worker.
An experienced worker was laying concrete on the second level of a construction project when the face shield from a welder's mask fell from an upper level. The construction worker agreed to cross the wet
A laboratory used for analyzing rock samples in the oil and gas industry was the scene of a fatal chemical exposure.
A long metal rod being handled by three workers touched an overhead power line. Two of the workers died of electrocution and the third was severely injured. The fatality occurred when they were using a

After doing the same job for nearly 20 years, a worker died in a falling from the top of a load on a flatbed trailer. He worked for a company which packaged sand, gravel and

AThree experienced welders were killed recently in separate incidents while using torches to work on containers they believed were empty. In the first, a mechanic supervisor was using a torch to cut a 55-gallon metal

A load of wooden beams fell from a flatbed trailer and killed a person who was standing by to help hook the trailer to a transport tractor. The victim and another worker were hired to

An experienced mechanic/welder was crushed to death by a door on a metal shredder at a large scrap iron facility. The hydraulically-operated door flips down to reject unshredded metals.
In 2000-2001, three welders in Massachusetts were fatally injured while cutting metal containers with torches.

When workers are electrocuted at worksites it's often because metal objects they are holding touch overhead electrical lines.