Too Experienced to Need Training?
A construction crew was preparing to pour concrete into forms. A laborer climbed a ladder on one side of a form and stepped over the form to stand on an unguarded scaffold on the opposite side.

A construction crew was preparing to pour concrete into forms. A laborer climbed a ladder on one side of a form and stepped over the form to stand on an unguarded scaffold on the opposite side.

A 23-year-old mill worker received a compound fracture to his foot when he tried to clear a conveyor jam.

A 59-year-old worker at a plant that makes plastic bags was fatally injured after falling down industrial stairs.

The victim, a 22-year-old male firefighter recruit collapsed while running at the end of a training day.

Falls are the second leading cause of accidental deaths in North America - second only to motor vehicle accidents.
A city maintenance worker who was trying to dislodge material from a street sweeper's suction hose was killed after accidentally placing his foot on a lever that raises and lowers the machine's hopper.

It’s important to warn your workers about the different heat-related [...]
Workers were preparing to fill a rail tanker car with canola oil for shipment. A hose fell into the car, and one worker climbed into the tanker to retrieve it. He was overcome by the
A company was contracted to dig post holes for a fencing project which was located adjacent to overhead power lines. A hydraulic auger with a 30-foot boom was being operated from a flatbed truck. On

A plant worker climbed eight feet up a steel storage rack structure to retrieve material from a top shelf. He fell to the concrete floor and died. The workplace did not have the proper equipment

A worker received an electric shock when he touched a boom on a lifting device. The ground wire had become detached. It was a hot day, so his skin was sweaty and moist, making it
A teenage worker died when his head became caught in the pasta-making machine he was operating. His job was to put the ingredients into the machine.
Electrical lines were grounded and de-energized before a lineman went to work on them, but he still died of electrocution. He was working from an aerial lift with an articulated boom. The basket touched energized
A worker was hired to clean up and crush cars in an automobile junkyard.
If only Tim had realized he was seconds away from death while watching his co-worker excavate a trench with a backhoe; he would have run away as far as possible.

A narcotics officer who died of cancer believed that exposure to the toxic products, solvents, and volatiles of the meth labs and drug factories he busted contributed to his death.

Two men working for a municipality subcontractor died of burns received while installing a valve in a concrete sewage channel.
A crane oiler was crushed between counterweights and the superstructure (base) of a rotating mobile crane.
Talking to your workers about electrical hazards is always timely. [...]
A worker and his supervisor were working in a confined space using a flammable substance and an acetylene torch. The confined space was a freshwater pumping station. The two men were installing rigid foam insulation
A man working in the recycling business was electrocuted when he was helping move some scrap metal stored beneath a power line.
Two plumbers had been working in a construction trench. When it was time to come back up to the street level, they rode in the bucket of an excavator. As the excavator operator started to
A welder in a metalwork plant pushed a 250 amp welder on a dolly over to a wall outlet. He plugged it in with his right hand while his left hand was on the welder.
The night shift crew at a paper mill told the incoming day shift supervisor that the press was putting an unwanted black line on the paper being produced.

Welding torch sparks and oil tanks don't mix. Actually that's not true. Under the right circumstances they can mix with tragic results.