Lack of Maintenance Sets Stage for Explosion
Failure to maintain equipment resulted in a fatal explosion in a metal products plant. Oil that had oozed from a hydraulic press caught fire. The fire caused two hydraulic fluid accumulators to explode.

Failure to maintain equipment resulted in a fatal explosion in a metal products plant. Oil that had oozed from a hydraulic press caught fire. The fire caused two hydraulic fluid accumulators to explode.

A worker, who had recently been given the responsibility of safety inspector for the gravel pit where he worked, was killed when he was crushed in a piece of moving machinery. He was trying to
A truck driver was killed when a bundle of plastic irrigation pipe he was securing slipped, striking him in the head. A forklift operator placed four bundles of pipe onto the victim's semi-trailer bed. The

A worker received massive head injuries when a crane lifting a 54,600-pound piece of steel tipped over. The crane was unstable because one outrigger device, which extends from the crane to balance it was inoperable.
The morning sun momentarily blinded Phil as stepped out of his truck. Only 7:30 in the morning and it was already warm. "Gonna be another scorcher," Phil thought, as he trudged across the parking lot he'd crossed for more than 30 years.

February was a bad month for Canadian firefighters. Two veteran firefighters were killed in Winnipeg in a flashover incident during a house fire.

A fire that killed a Long Island, NY, man and critically injured his wife was caused by a faulty power cord, according to fire officials.
As a forklift operator, it's important to realize the majority of the safety responsibility rests on your shoulders - you are in the driver's seat.
A saw operator died when struck by a 710-pound (322-kilogram) aluminum plate that fell while suspended by an overhead crane.
Lift trucks are handy tools found on the sites of [...]

A hospital maintenance worker was repairing a broken hand held hair dryer. He asked a co-worker to assist in locating some acetone to remove epoxy from his hands.

While helping to reshingle a farmhouse roof, a worker was handling an aluminum ladder. The ladder contacted 7,200 volts of electricity when it hit a power line. The worker was electrocuted. An electrical entry wound

A welder was cutting metal while working in a high contamination area of a nuclear energy site. A spark or a piece of hot metal landed on the lower leg of his anti-contamination coveralls. Because

A lead hand employed by a heavy equipment dealer was responsible for operating a grader and a simple conveyor system. The conveyor was being used to separate topsoil. The conveyor was set on the diagonal,
An equipment operator working for a power company was killed when she backed a forklift into a trench covered with plywood. The incident occurred at a company building that was being partly torn down to

Several unsecured propane cylinders were being stored on the third floor of a construction project. A large propane heater was in use nearby to dry out the work-in-progress. A loud noise alerted the workers that
It was a good day for a swim; it was only 35 yards from the shore; the water was only 15 feet deep. Plus, there were plenty of people around. So what went wrong?

A young father of two children was killed in an unusual manner in Dayton, OH, late in 2006. Thomas Morgan, 29, was trying to free a jam in a concrete crusher when he was struck by part of the machine.

Jeffrey Mills was the kind of man who didn't mind going out of his way to help out.

Being experienced in your work does not provide immunity from injuries. Nearly a quarter of acute injuries happen to experienced workers - as a result of human errors.
His parents were long-time customers, and the victim had done odd jobs at the store.

There are at least 8 ways for supervisors to determine [...]
A worker was attempting to remove an end plug from a pipe containing a 100 per cent concentration of anhydrous hydrofluoric acid under pressure. He applied sufficient pressure with a wrench to break the pipe,

Early in the evening an operator of a crane was installing storm sewer pipes. Suddenly, the boom of the crane contacted the overhead high tension wires. A pipe layer who was guiding the pipe as

An apprentice mechanic, working part-time with a transport company, was working when a drum of windshield washer antifreeze exploded. The explosion was set off by a spark from his welding. The investigation into this death