Shaky Platforms No Place for Workers
Standing on a pile of stacked rounded steel bars proved to be a deadly decision for a worker. The worker climbed onto the pile in a warehouse in order to attach a sling so a
Standing on a pile of stacked rounded steel bars proved to be a deadly decision for a worker. The worker climbed onto the pile in a warehouse in order to attach a sling so a

The murder of a teenage girl on her first solo night shift at a gas station has brought calls for improving security for night workers who must work alone.
On June 8, 2005, two window washers were working on a fourstorey building in Burlington, Massachusetts.
Many questions still remain about the late August crash of a passenger jet on takeoff from Lexington, KY, but some of the early answers aren't encouraging.

A young father of two children was killed in an unusual manner in Dayton, OH, late in 2006. Thomas Morgan, 29, was trying to free a jam in a concrete crusher when he was struck by part of the machine.
A car dealer in the Atlanta area stands charged with two counts of murder after two employees were shot dead.

The victim, a 22-year-old male firefighter recruit collapsed while running at the end of a training day.
A simple broken weld seam caused the death of a 68-year-old man, when an anhydrous ammonia tank ruptured.
While shingling a house, a 46-year-old roofer fell more than 20 feet (six meters) to his death.
A foundry laborer was electrocuted as he was helping to feed stainless steel scrap into a furnace refractory.
A man was strangled after his shirt-sleeve was caught by the rotating drill bit of a drill press he was operating.
A 23-year-old worker at a company that produces concrete and brick pavers, masonry and retaining walls, died after becoming caught in a concrete mixer.

A worker was inside a pressure trailer tanker applying a coat of anti-corrosive paint. He was using a safety lamp with a 500-watt quartz beam. A folded coat hanger was wrapped around the light and hooked to the manhole flange.

About two weeks before this fatality, an electrical plug on a power cable of a welding machine was found to be damaged. The broken piece was the protective aluminum cover which housed the plug attached
Two workers died of oxygen deprivation as they were repairing the concrete wall at a garbage disposal site. One of them had been attaching anchor bolts to the wall of an intake pit and was
Two workers were installing shutters on the windows of a building. One was about six feet (two meters) above the ground on a scaffold.
Two plumbers had been working in a construction trench. When it was time to come back up to the street level, they rode in the bucket of an excavator. As the excavator operator started to
Two employees were painting the outside of a three-story building. They were standing on a two-point suspension scaffold. The outriggers for the scaffold were inadequately counterweighted with three five-gallon (18.93-liter) buckets of sand. They were
Two finishers were working with a chemical product on a parquet tile floor in a residential basement. The heavier-than-air vapors from the product accumulated and spread to an adjacent room where a gas-fired water heater
A spotter was crushed to death by a road roller during paving work. He had been guiding construction vehicles and general traffic on the road as asphalt pavement was being applied and finished. The roller

A cleanup person was instructed by his foreman to do the cleanup of a conveyor area jammed with debris. This involved loading the debris onto the conveyor, running it until it was clean, shutting it
A punch press operator was killed when he was struck in the head by a hand crank tool. The fatality occurred in a plant that manufactures lenses and other parts for developing photographic film.
A tubular welded frame scaffold was covered with ice and snow. A construction laborer working on the third level slipped and fell headfirst to his death on the pavement about 20 feet (6.1 meters) below.
A forklift driver and two laborers were stacking 40-foot (12.91-meter) I-beams in preparation for a structural steel construction job. One of the laborers was placing a wooden spacer on the last I-beam when the forklift
Two workers died after a welding spark set off an explosion in a tanker truck. They were starting to replace an overflow pipe on the truck when the spark ignited flammable gas in the tank.