Custodian Falls, Dies From Blood Clot
A school custodian who was working alone survived a fall from a ladder only to die from a blood clot a few days later.
A school custodian who was working alone survived a fall from a ladder only to die from a blood clot a few days later.
A worker was hired to clean up and crush cars in an automobile junkyard.
Little is known about Antonio Tapia, 27, except that he was a Mexican immigrant and was living with a relative, Ricardo Vega Sanchez, and Sanchez’s wife and daughter, in Burlington, NJ.
In life, Jeffrey Mills made a difference. In death, he also made a difference, but with a huge impact.

We're taught to make eye contact to signify our intentions - such as when crossing the road on a crosswalk.
A 23-year-old supervisor lost his life to a rotating sidearm brush while cleaning the floor of an older mechanized carwash.

An electrical arc ignited dust in a wood flour mill, causing an explosion that burned a worker to death.
The incident happened in a matter of seconds. A scaffold collapse left three workers dangling from their safety ropes beneath the Jefferson Barracks Bridge over the Mississippi River.
Lester L. Woda, an orchard manager, drowned in Okanogan, WA, after becoming trapped in a reservoir pipe.

A crew leadman and a foreman were fatally burned when their oxygen-saturated clothing caught fire.
A crane oiler was crushed between counterweights and the superstructure (base) of a rotating mobile crane.

At approximately midnight, a worker was attempting to repair a leak in a hydraulic cylinder of a newly installed washer in a commercial laundry plant. Leaning under the machine, he attempted to unhook a hydraulic
A carpenter building a wall form for concrete died when he fell onto a steel reinforcing dowel that was sticking straight up out of a concrete footing. He and a fellow worker were standing on
A city engineer collapsed in a manhole while attempting to retrieve a flow meter. The victim, an assistant engineer and a student intern had gone to a landfill to replace a battery of a flow

Early in the evening an operator of a crane was installing storm sewer pipes. Suddenly, the boom of the crane contacted the overhead high tension wires. A pipe layer who was guiding the pipe as
A welder with 20 years’ experience as an iron worker died after he and his metal cage fell from a high-rise building where he and a co-worker were welding tube girts. Each welder was supported
A man working in a steel plant was removing steel slag from the bottom of an upright ladle. He was using a jack hammer, a pry bar and a cutting torch fueled by acetylene and oxygen.
A bulldozer operator was preparing a roadbed by using the machine to lift trees out of the way. A hydraulic line to the right front hydraulic cylinder ruptured, spraying hydraulic fluid onto the engine manifold
Many fatalities are caused by cave-ins of trenches that have not been shored up. This case report is about a fatality that occurred because shoring had been put in place but not braced. The victim
A truck driver was crushed to death between the frame and dump box of a dump truck. He had been raising the dump box when the safety over-travel cable joining the truck frame and box
A teenage worker died when his head became caught in the pasta-making machine he was operating. His job was to put the ingredients into the machine.
A snowplow driver went missing and was presumed drowned after the vehicle crashed through the ice on a lake. He had been assigned to plow a winter road linking two communities.
Two workers rode a self-propelled lift machine to their deaths as it crashed to the ground. One was washing windows and the other was obtaining measurements for building changes. One of the victims was operating

Welding torch sparks and oil tanks don't mix. Actually that's not true. Under the right circumstances they can mix with tragic results.
A 54-year-old construction laborer died after a motor grader rolled over his upper back and head. The man, who was one of a crew of nine workers, was helping to install a new road in