Workers Burned in Oxygenated Air
Two men working for a municipality subcontractor died of burns received while installing a valve in a concrete sewage channel.

Two men working for a municipality subcontractor died of burns received while installing a valve in a concrete sewage channel.
Joe had been working in the North Carolina tobacco field for just over a week. The first few days on the farm were hot and humid, with welcome breaks of rain. But on this day, there was no rain. The thermometer had already climbed to 95F when Joe stopped for his soda and cracker break at 10 a.m. By the time the temperature reached between 100F and 108F at 3 p.m., Joe complained to the crew leader that he wasn?t feeling well. The crew leader gave Joe a drink of water and drove him back to the workers? housing, where he left Joe to rest for a while. Forty-five minutes later, Joe was found on the steps of the house. He was unconscious. Emergency medical services were called and Joe was transported to the hospital, where his core body temperature was recorded at 108F. But Joe didn?t respond to the medical personnel?s attempts to cool him. His death was attributed to heat stroke.
Lift trucks are handy tools found on the sites of [...]
Workers were preparing to fill a rail tanker car with canola oil for shipment. A hose fell into the car, and one worker climbed into the tanker to retrieve it. He was overcome by the

A journeyman painter died of massive thermal burns caused when an electrical contact set off an explosion of volatile waterproofing material. The painter and a co-worker were in the basket of a personlift, designed to

Failure to maintain equipment resulted in a fatal explosion in a metal products plant. Oil that had oozed from a hydraulic press caught fire. The fire caused two hydraulic fluid accumulators to explode.

A foreman placed a wooden ladder into a mixing vat that had recently been sprayed with a cleanser called methylene chloride. While on the ladder, he called over to a co-worker to start the fan in the vat.
A teenage worker died when his head became caught in the pasta-making machine he was operating. His job was to put the ingredients into the machine.
A new untrained worker died of a head injury after he was hit by a falling tree. He was standing at the rear of a skidder being used in a logging operation at the time of the incident.

The murder of a teenage girl on her first solo night shift at a gas station has brought calls for improving security for night workers who must work alone.
One minute he was applying a flammable solvent to a floor to loosen linoleum. The next moment he was engulfed in flames, with third and fourth-degree burns to most of his body.
A 34-year-old machine worker was electrocuted during a cleanup job at the wood pellet manufacturing plant where he worked in Oregon.

The symptoms of heat-related illness would have been obvious to anyone trained to spot them.

Standing on a makeshift platform spanning the forks of a lift truck isn?t safe. In California, doing so proved lethal for a 29-year-old worker.

It’s important to warn your workers about the different heat-related [...]
A worker and his supervisor were working in a confined space using a flammable substance and an acetylene torch. The confined space was a freshwater pumping station. The two men were installing rigid foam insulation

While helping to reshingle a farmhouse roof, a worker was handling an aluminum ladder. The ladder contacted 7,200 volts of electricity when it hit a power line. The worker was electrocuted. An electrical entry wound
At a sawmill, a fire broke out. It had originated in the vacuum system which picks up sawdust from the various woodworking machines and carries it to a large silo outside the building.

Three workers, one licensed electrician and two apprentices, were rewiring a residential basement. They were using a 300 watt lightbulb, drawing power from a temporary connection to power wires on an outside pole. The electrician
The night shift crew at a paper mill told the incoming day shift supervisor that the press was putting an unwanted black line on the paper being produced.

A worker received massive head injuries when a crane lifting a 54,600-pound piece of steel tipped over. The crane was unstable because one outrigger device, which extends from the crane to balance it was inoperable.
Wearing gloves around moving machinery can be a recipe for disaster, as a recent fatality in Colorado illustrates.

A former fire crew boss has been charged with manslaughter and lying to investigators five years after four forestry firefighters perished in a wildfire in Washington State. Ellreese N. Daniels faces four counts of involuntary manslaughter and seven counts of making false statements to people who were investigating the fatal fire.
A 47-year-old logger was working to set the chokers in a cable logging operation.

A 61-year-old woodworker was killed as he was trying to replace a glue tray in a glue-press machine while it was still operating.