Steamroller Overturns On Operator
California Occupational Safety and Health Administration (Cal-OSHA) officials want to find out if a steamroller operator was safely belted in before the machine overturned and killed him.
California Occupational Safety and Health Administration (Cal-OSHA) officials want to find out if a steamroller operator was safely belted in before the machine overturned and killed him.
A Haitian man who was working hard for a better life died suddenly when scaffolding he was moving collapsed onto him at a construction site in Fort Lauderdale, FL.

February was a bad month for Canadian firefighters. Two veteran firefighters were killed in Winnipeg in a flashover incident during a house fire.

Dale Scott was in the mechanic's shop alone fixing a leaky left rear tire on a front-end loader.
Menes Daniel, Torivio Acevedo and Endy Guirand were killed when a concrete form collapsed.
A construction worker was killed when a skid-steer loader crushed him against a dump truck.
A 22-year-old roofer fell approximately 22 feet (6.7 meters) off the edge of a roof onto concrete and died.

It’s important to warn your workers about the different heat-related [...]
A worker was attempting to remove an end plug from a pipe containing a 100 per cent concentration of anhydrous hydrofluoric acid under pressure. He applied sufficient pressure with a wrench to break the pipe,
A brick wall collapsed and killed a worker digging in a trench beside it. He had been looking for a water line and had dug down about four feet (1.22 meters). The wall, seven feet
Employees working for a plumbing contractor were hoisting pipes up from ground level to higher levels for storage. They were standing on structural steel while they transferred the pipes to the floor above. One employee

An apprentice mechanic, working part-time with a transport company, was working when a drum of windshield washer antifreeze exploded. The explosion was set off by a spark from his welding. The investigation into this death
A worker was operating a bulldozer at the top edge of a sloped excavation. The trench was being developed for a drainage ditch six feet (1.8 meters) deep. The surface was covered with snow and

A laborer working in a pulp mill went into an old, unused control room for his lunch break. Warning lights were flashing indicating a potentially dangerous situation with a plugged pressure sensing device. The worker;
A 54-year-old construction laborer died after a motor grader rolled over his upper back and head. The man, who was one of a crew of nine workers, was helping to install a new road in
One pipelayer was crushed to death and another injured when a trench collapsed.
An Alberta painting contractor is paying the price after a worker fell from a scaffold that rolled from under him while he was trying to staple a tarp onto a wall.

A young father of two children was killed in an unusual manner in Dayton, OH, late in 2006. Thomas Morgan, 29, was trying to free a jam in a concrete crusher when he was struck by part of the machine.
A 64-year-old operator was running an excavator in British Columbia.

In the first fatality for his company, a North Carolina worker died after a fall from a truck bed.
A 53-year-old backhoe operator was killed, and his son seriously injured, when the wall of a trench they were working in caved in.
Joe had been working in the North Carolina tobacco field for just over a week. The first few days on the farm were hot and humid, with welcome breaks of rain. But on this day, there was no rain. The thermometer had already climbed to 95F when Joe stopped for his soda and cracker break at 10 a.m. By the time the temperature reached between 100F and 108F at 3 p.m., Joe complained to the crew leader that he wasn?t feeling well. The crew leader gave Joe a drink of water and drove him back to the workers? housing, where he left Joe to rest for a while. Forty-five minutes later, Joe was found on the steps of the house. He was unconscious. Emergency medical services were called and Joe was transported to the hospital, where his core body temperature was recorded at 108F. But Joe didn?t respond to the medical personnel?s attempts to cool him. His death was attributed to heat stroke.
Here is a checklist for individual workers that you can [...]

Use this ladder safety checklist to ensure that the ladders [...]
One of your key responsibilities in preventing machine injuries is [...]